Current Transformer Test Set AEZCT 2000A Amperis

Mã sản phẩm:	AEZCT 2000A
Sử dụng cho Model:
Hãng SX:	Amperis
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Số lượng:

Đặt hàng

Liên Hệ Hỗ Trợ

- SĐT: 0984 843 683
- Mail: info@ttech.vn
- - Zalo: 0984.843.683

Thông tin sản phẩm

The AEZCT-2000A is Amperis’ third-generation microprocessor-based current transformer test set. The AEZCT-2000A can perform the current transformer (CT) excitation test, measure the CT winding resistance and CT current-ratio automatically. All of the AEZCT-2000A’s test leads can be connected to the CT output terminals (X1, X2, X3, X4 and X5), eliminating the need for lead switching during testing. Test voltage output is automatically raised and lowered by the AEZCT-2000A without any operator intervention. With up to 2000 Vac excitation test voltage available, the AEZCT-2000A can easily perform excitation tests on very large CT’s.

Thông số kỹ thuật

AEZCT-2000A’s Specifications
Type	Portable current transformer test set
Physical specifications	17"W x 12½"H x 14"D (42.7 cm x 32cm x 35.6 cm); Weight: 60 lbs (27.2 kg)
Input power	100 ¬ 120 Vac or 200 ¬ 240 Vac (factory pre-set), 50/60 Hz
Measurement method	ANSI/IEEE C57.12.90, IEC 60044-1 and ANSI/IEEE C57.13.1
Output test voltages	0 - 50 Vac @ 10A max; 0 - 300 Vac @ 10A max; 0 - 500 Vac @ 5A max; 0 - 1200 Vac @ 2A max; 0 - 2000 Vac @ 1.2A max
Voltage reading range	0 - 2,200 Vac; Accuracy: ±1.0% of reading, ±1 volt
Current reading range	0 - 10A; Accuracy: ±1.0% of reading, ±0.02A
Current ratio range	0.8 - 999: 0.1%, 1000 - 1999: 0.3%, 2000 - 5000: 1%
Phase angle measurement	0 - 360 degrees; Accuracy: ±1.0 degree
Resistance reading range	100 micro-ohms ¬ 10 ohms; Accuracy: 2% of reading, ±1 count, ±10 micro-ohm
Display	Backlit LCD Screen (240 x 128 pixels; 114mm x 64mm); viewable in bright sunlight and low-light levels
Printer	Built-in 4.5-inch wide thermal printer
Computer interfaces	One RS-232C port, one USB port
External data storage	One USB Flash drive interface port (Flash drive not included)
PC software	Windows®-based CT Analysis software is included with purchase pric
Internal test record storage	Stores 140 test records. Each test record may contain up to 10 sets of excitation, resistance and ratio data
Internal test plan storage	Stores 128 test plans. Each test plan can store 10 excitation test voltage and current settings
Safety	Designed to meet UL 6101A-1 and CAN/CSA C22.2 No 1010.1-92 standards
Environment	Operating: -10°C to +50°C (+15°F to +122°F); Storage: -30°C to +70°C (-22°F to +158°F)
Humidity	90% RH @ 40°C (104°F) non-condensing
Altitude	2,000 m (6,562 ft) to full safety specifications
Cables	Five 20-foot X cable sets, one 35-foot H cable set, power cord, one cable-carrying duffel bag
Warranty	One year on parts and labor
NOTE:the above specifications are valid at nominal voltage and ambient temperature of +25°C (+77°F). Specifications are subject to change without notice