Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Diagnostic Surge Suppressor + Scope Meter EV20820IC SurgeX

Mã sản phẩm: EV20820IC
Sử dụng cho Model:
Hãng SX: SurgeX
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
enVision Diagnostic Surge SuppressorThe SurgeX EV20820IC enVision diagnostic surge suppressor is the ultimate troubleshooting tool for service organizations. Engineered with state-of-the-art power protection, electrical intelligence, diagnostic software, and real-time scope meter technology, ESP's innovative cost-savings solution gives service teams the ability to identify power problems and eliminate unwarranted costs that can impact the profitability of your service department.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Features

EV20820IC Diagnostic Surge Suppressor + Scope Meter, 20 amps at 120/230 Volts Split Phase
Internal battery to provide accurate data and time stamps, even during power outages
20 Amps at 120/230 Volts split phase load rating
Integrated scope meter diagnostic capabilities
Measures neutral to ground voltage, crest factor, power factor, and line frequency metrics.
Identify preexisting power conditions, analyze real-time power anomalies, and generate electrical performance reports.
Lowers service costs, ensures fault-less installs, and improves customer uptime
Built-in LCD screen provides easy access to recorded events, parameters and settings
Protects connected equipment from power disturbances
Power over Ethernet protection
Remote IP capable (sold separately)
Lifetime product and connected equipment protection warranty


Model: EV20820IC Specifications
Load Rating 20 Amps at 120/230 Volts Split Phase
Voltage Protection Rating (VPR) 700V All Modes
Attenuation Normal Mode:> 30 dB 80kHz – 50MHz
Common Mode: > 30 dB   200 kHz – 50MHz
Power Requirement (no load) 4 Watts
Under-Voltage Shutdown Adjustable from 0 V to 120 V. Default 160 V.
Under-Voltage Record Adjustable from 0 V to 220 V. Default 180 V.
Under-Voltage Restore Adjustable from 160 V to 220 V. Default 190V.
Over-Voltage Shutdown Adjustable from 260 V to 300 V. Default 280 V.
Over-Voltage Record Adjustable from 260 V to 300 V. Default 270 V.
Over-Voltage Restore Adjustable from 260 V to 300 V. Default 260 V.
Internal Memory Capacity 512 Power Quality Events with Timestamp
138 Day Electrical Parameter History at 30 minute intervals
Timestamp Accuracy ± 1% Typical Product Accuracy
Measurement Accuracy ± 2% Typical product accuracy
Response Time Over-Voltage: 90 ms
Under-Voltage: 200 ms
Power Outage Event Definition AC Voltage has dropped below 20V
Surge Event Definition Filter has been exposed to a transient voltage in one of the 3 possible modes (between Live and Neutral, between Live and Ground, between Neutral and Ground) with a peak amplitude of 500V* or higher and a frequency of 20 kHz or higher. *500V surge voltage amplitude applies to IEEE C62.41
Category B Impulse; surge voltage amplitudes necessary for detection of other surge types may vary.
Modem/Fax Protection Single telephone line surge suppression
Ethernet Protection CAT6 network surge protection
Dimensions 6.125" W x 8.375" D x 2" H
Weight 2.25 lbs
Temperature Range 5C to 40C
Humidity Range 5% to 95% R.H. Non-condensing
Warranty Limited lifetime product warranty and limited lifetime connected protection warranty.


Bình luận