Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Đồng hồ đo nhiệt độ FN2430 Labom

Mã sản phẩm: FN2430
Sử dụng cho Model:
Hãng SX: Labom
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Features


Case, measuring system and wetted parts of stainless steel
Case NS 100/160, degree of protection IP 66
Stem diameter 6, 8 and ≥ 10 mm
Different connections can be supplied
Short immersion lengths of the stem may be used

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Constructional design / case
Case bayonet-ring case of st. steel material no. 1.4301 (304), nominal size 100 and 160 mm
Process connection temperature detecting element via capillary connected radially at bottom resp. at rear with indicating unit.
Different connections can be supplied, see order details
Case design degree of protection IP 66 per EN 60529, alternatively with liquid filling
Case mounting stand-alone mounting with wall bracket per DIN 16281, alternatively with flange for surface mounting or for flush mounting with DIN mounting flange
Measuring element bourdon tube dead zone free inert gas filling
Capillary stainless steel material no. 1.4571 (316Ti) in different lengths with buckling protection, alternatively with sliding screwing, coated with protective tube upon request
Temperature detecting element stainless steel material no. 1.4404 (316L). Diameter 6, 8 and ≥ 10 mm. See order details for standard lengths and active lengths, other values upon request
Movement stainless steel
Scale aluminium, white with black inscription. Alternatively with marking resp. fixed reference pointer.
Scale may be positioned as required, at the factory.
Pointer aluminium, black with micro adjusting device for zero-point correction
Window safety glass, alternatively macrolon with adjustable reference pointer
Case seal Perbunan
Measuring system damping liquid filling glycerine/water
Nominal ranges per EN 13190, max. -100...700 °C, measuring spans ≥ 60 °C
Accuracy per EN 13190, class 1
Ambient temperature per EN 13190; ambient temperatures that deviate from EN
are to be specified
Weights (without capillary, screwing and temperature detecting element) NS 100, without filling: approx. 1.0 kg
NS 100, with filling: approx. 1.3 kg
NS 160, without filling: approx. 1.5 kg
NS 160, with filling: approx. 2.1 kg
Instructions for use The loading capacity of the temperature detecting element depends on the following
parameters:
1. measured medium
2. measured medium pressure
3. measured medium temperature
4. flow velocity
5. immersion length
6. material
A technical test is neccessary where required
Information on other models upon request or see order details

Bình luận