| Case |
high quality bayonet ring case NS 100
material: st. steel mat.-no. 1.4301 (304) |
| Degree of protection (EN 60529) |
IP 66 |
| Measuring element |
helix from thermostatic bimetal per DIN 1715 with good adjusting power and fast acting, thermally aged, base and connection piece laser welded |
| Temperature detecting element |
stainless steel mat. no. 1.4571 (316Ti). Diameter 6 and 8 mm. Can be supplied in standard lengths, see order details; other
sizes upon request. |
| Process connection |
rigid temperature detecting element, vertical resp. axial protruding at rear. Different connections available, see order details. |
| Pointer shaft |
stainless steel mat.-no. 1.4571 (316Ti), with multiple bearings |
| Scale |
pure aluminium, white with black inscription |
| Pointer |
pure aluminium, black with micro adjusting device for zero-point correction |
| Window |
instrument glass, alternatively macrolon with contact lock |
| Case seal |
sealing ring: Perbunan |
| Nominal ranges |
per EN 13190 see order details. Special ranges upon request. |
| Accuracy |
see table in data sheet T3-025 |
| Ambient temperature |
per EN 13190 ambient temperatures that deviate from EN
are to be specified |
| Storage and transport temperature |
per EN 13190 max. -20...+60 °C |
| |
For measuring devices with inductive contact type SJ2-S1N (NS 100, double contact): For safe operation refer to TA_044! |
| Electrical connection |
connection plug with cable gland M 20 x 1.5 and removable test cover, mat. Macrolon |
| Switch function |
Touch contacts or inductive contact see order code. Further technical details see operating instructions BA_066 and TA_039. |
| Weight |
DN 100: approx. 0.6 kg |
| Instructions for use |
The loading capacity of the temperature detecting element depends on the following parameters:
1. measured medium
2. measured medium pressure
3. measured medium temperature
4. flow velocity
5. immerison length
6. material
A technical test is necessary where required. |