| Case |
high quality bayonet ring case NS 100/160, material: st. steel mat.-no. 1.4301 (304) |
| Degree of protection (EN 60529) |
IP 66 |
| Measuring element |
bourdon tube dead zone free with inert gas filling |
| Capillary |
stainless steel material no. 1.4571 (316Ti) in different lengths, with buckling protection, coated with protective tube upon request |
| Clip-on temperature detecting element |
stainless steel material no. 1.4404 (316L), to fit pipe resp. circular form.
Suited for fast installation on pipe diameter approx. 25...150 mm |
| Case filling |
liquid filling Labofin |
| Process connection |
rigid clip-on temperature detecting element, radially protruding at bottom, or centrically at rear for horizontal resp. vertical piping; alternatively with capillary |
| Movement |
stainless steel with compensation |
| Scale |
pure aluminium, white with black inscription.
Option: with marking |
| Pointer |
pure aluminium, black with micro adjusting device for zero-point correction |
| Window |
non splintering laminated glass. Option: non splintering plastic (Macrolon) with contact lock |
| Case seal |
sealing ring: Perbunan
filling plug: Desmopan |
| Nominal ranges |
per EN 13190, however max. up to 250 °C |
| Accuracy class |
data per DIN 16196 (depending on range) for all temperature detecting elements with diameter d5 and standard immersion length l1 see data sheet T3-030 |
| Ambient temperature |
per EN 13190 ambient temperatures that deviate from EN
are to be specified |
| |
For measuring devices with inductive contact type SJ2-S1N (NS 100, double contact):For safe operation refer to TA_044! |
| Storage and transport temperature |
per EN 13190, max. -20...+60 °C |
| Electrical connection |
connection plug with cable gland M 20 x 1.5 and removable test cover, mat. Macrolon |
| Switch function |
Touch contacts or inductive contact devices see order code. Further technical details see operating instructions BA_066 and TA_039. |
| Mounting |
stand-alone mounting with wall bracket ; alternatively with flange for surface mounting or for flush mounting with DIN mounting flange |
| Weights |
DN 100, without filling: approx. 1.3 kg
DN 100, with filling: approx. 2.1 kg
DN 160, without filling: approx. 2.1 kg
DN 160, with filling: approx. 4.4 kg |