| Fiber Type |
Single Fiber |
| Applicable Fibers |
SM (single mode), MM (multi-mode), DS (dispersion), NZDS (non-zero dispersion),
BIF/UBIF
|
| Average Loss |
0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS), 0.02dB (BIF/UBIF) |
| Return Loss |
9s / 7s (fast mode) |
| Typical splicing time |
250μm, 600μm, 900μm，2~3mm and 3.5mm |
| Compatiable cable |
250μm, 600μm, 900μm，2~3mm and 3.5mm |
| Fiber aligning |
Core alignment and cladding alignment |
| Fiber Diameter |
Cladding diameter:80～150μm |
| Coating diameter:100～1000μm |
| Magnification |
X or Y, magnify 360X |
| X + Y, magnify 180X |
| Image display |
High-performance 4.3 inch LCD |
| Tensile test |
Standard 2N |
| Splicing mode |
100 (10 factoty pre-defined) |
| Heatig mode |
100 (4 factory pre-defined) |
| Heat-shrinkable tubing |
60mm, 45mm, 20mm or other types |
| Battery capacity |
7800mAH, 86.58WH |
| 300 times (splicing and heating) |
| Charging time: about 3h (can be used while charging) |
| Battery life |
1000 charging cycles |
| Electroce life |
Typical 3,000 times, and replaceable |
| External interface |
Mini USB |
| Result record |
Maxmium10000 results |
| Heater Function |
Automatic, support user defined heating mode, 0ºC ~ 300ºC adjustable |
| Power supply |
Built-in lithium battery: 11.1V; AC/DC adapter input: AC 100-240V
Output: DC 13.5V / 5.0A
|
| Working Environment |
Temperature: -20ºC ~ +55ºC (-4ºF~131ºF); Humidity: 95% RH (40°C non-condensing)
Altitude: 0~5000m
|
| Dimension |
L×W×H＝166×146×159 (mm) |
| Weight |
1.6kg (without battery), 2.0kg (with battery) |