SAT-8610 is a synthetic radio frequency generator with broadband and continuous wave. The latest integrated technology is applied in it, which ingeniously solves the contradiction between bandwidth and power in the traditional power generator, making it become the most pioneering power generator with high performance in the field of wireless test.
Preset frequency
The most commonly used 10 test frequency points were preset and the specific frequency can be set according to user’s requirements. Temporary adjustment of each frequency point can be made under the monitoring of the external frequency meter
Ultra-broadband design
A continuous set of 300MHz～3000MHz covers the vast majority of mobile communication frequency band. Automatic uninterrupted and continuous scanning can be realized with 1 MHz as step by step within the range from 300MHz to 3000MHz by PC Frequency scanning software
High-performance portable design
An energy-saving user interface can significantly enhance the simple operation of instrument and maximize its running time
High efficiency test
No preheating or calibration process needed after start-up, and the test time is greatly shortened compared to other terminal type devices (such as network analyzer, feeder line tester, etc.).
Thông số kỹ thuật
Auxiliary output power：> - 10 dBc / 0.1 mW
Auxiliary output flatness: + / - 1 dB
Auxiliary output stability： 0.01 dB / ° C
Nominal impedance：50 Ω
Output standing wave ratio： < 1.5
DC tolerance：50 V (the main output) / 5V output (auxiliary output)
Internal power： lithium ion battery with high reliability
Frequency range： 300MHz～3000MHz
Frequency point resolution：1 MHz
Continuous frequency sweep range：300 MHz to 3000 MHz
Frequency accuracy： < + / - 20 ppm
Frequency stability： \"+ / - 0.5 ppm / ° C
The main output power： > 30dbm / 1 w
The main output flatness： + / - 1 dB
The main output stability： 0.01 dB / ° C
The main output harmonic component： < - 40 dBc
The main output clutter component： < - 70 dBc
The main output sub-harmonic component：< - 80dBc
External power supply：5V / 2A DC
RF connector：Type N (female)
Auxiliary output：SMA (female)