| series |
FGS-50E |
| Model |
FGS-50E-L (low speed) |
FGS-50E-H (high speed specification) |
| Measurement load |
500N (50kg) |
| Withstand load |
500N (50kg) |
| Feed rate |
6-180mm / min |
20-600mm / min |
| Speed setting |
By the operation panel, set the speed |
| stroke |
400mm |
| Display |
LCD 3-digit, movement speed, display the operating mode |
| Moving Speed |
6-180mm / min |
20-600mm / min |
| action mode |
Manual (MAU), inching (JOG), 1 cycle (SIG), round-trip repeat (CON) |
| input |
Overload input
stops at the overload signal of FGPX (FGP) |
| Measuring table |
150 × 93mm |
| Operating temperature limit |
0-45 ℃ (with no condensation) |
| Power supply |
AC100V-AC240V ± 10% |
| mass |
About 20kg |
| External dimensions |
220 × 680 × 358mm |
| accessories |
And connection cable 1
power supply cable single
cable clip one
-socket bolts (four M4 × 12 force gauge mounting, M6 × 12 2 pieces jig attached)
one for • Allen wrench M8, for M4 one
one book, manual
, warranty card one |
Compatible models
(corresponding digital force gauge) |
FGP series (0.2-50), FGPX (0.2-50) |