- Precision Humidity Generation
- High Temperature, High Flow Capability
- A ccurate Formulations
- Using the two-pressure technique, humidity is generated by fully saturating gas at a known temperature and pressure, then reducing the pressure to a lower value (typically ambient) at the same temperature. The humidity produced by this technique is determined solely from measurements of temperature and pressure, and does not rely on measurement of the water vapour content.
- Air or Water Cooled Refrigeration
Thông số kỹ thuật
Generator Ranges: |
|
Relative humidity (from 5 to 75 °C) |
10...99 %RH |
Frost point |
-21 ...0 °C |
Dew point |
-23 ...+75 °C |
Bath temperature range |
5 ...+85 °C |
Flow rate |
25 ...150 slpm |
Saturation pressure - Low range |
Ambient ...1500 hPa
(Ambient ...23 psia) |
Saturation pressure - High range |
1500 ...12000 hPa
(23 ...175 psia) |
Test chamber pressure |
Ambient |
Performance: |
|
RH resolution |
0.01 %RH |
RH accuracy |
±0.3 %RH |
Bath temperature resolution |
0.005 °C |
Bath temperature control stability |
±0.02 °C |
Bath temperature uniformity |
0.04 °C |
Bath temperature measurement accuracy |
±0.02 °C |
Gas flow rate resolution |
0.1 slpm |
Gas flow rate accuracy |
±4 slpm |
Saturation pressure accuracy - Low range |
±0.15 hPa
(±0.0023 psia) |
Saturation pressure display resolution - Low range |
0.1 hPa
(±0.001 psia) |
Saturation pressure accuracy - High range |
±1.4 hPa
(±0.02 psia) |
Saturation pressure display resolution - High range |
1 hPa
(±0.01 psia) |
Test chamber pressure accuracy |
±0.15 hPa
(±0.0023 psia) |
Test chamber pressure resolution |
0.1 hPa
(±0.001 psia) |
Standard Features: |
|
Gas type |
Air or Nitrogen |
Gas pressure rating (MAWP) |
200 psig |
Additional Information |
|
Electrical power |
200-240 VAC, 30A, 1-phase, 50-60 Hz |
Gas supply |
Max. 1.7 MPa @ 200 slpm, oil free
(Max. 250 psig @ 7 scfm, oil free) |
Cooling water (optional) |
3 gpm (12L/m) maximum @ 20-25 °C |
Environmental |
|
Operating temperature |
+15 ...+30 °C |
Storage temperature |
0 ...+50 °C |
Humidity |
5 ...95 %RH, non-condensing |
Dimensions |
|
Test chamber dimensions |
300 mm x 300 mm x 300 mm |
Physical dimensions |
0.5 m x 1.2 m x 0.9 m |
|