Electrolytic film thickness meter CT-3 Features
Lightweight, compact
Gunto lightweight, compact body.
Corresponding to various plating measurement
It can be measured even from any plating range.
High sensitivity range added
It adds a high sensitivity range.
A wide range of cab rate range
Cab rate range is extensive and 15% ±.
1/100 range is possible
Au, Cr Similarly, other plating is also possible to 1/100 range.
C gasket range standard equipment
A, to B gasket, C gasket range is also standard equipment.
Active featured
With an active function, also measures to smooth sample was somewhat oxidation.
Easy range setting
Easy range setting of measurement plating, is a mistake hard to conscience design.
Electrolytic film thickness meter CT-3 accessories
| Measuring table |
Settings are very easy! Round bar is also at the touch of a button OK! In particular, it is ideal for continuous measurement of the same shape. |
| Standard accessory |
- Electrolyte solution (100ml) 1 present
and washing bottle 1 pc
and liquid bottle 1 pc
, measuring table
cell A, B
-gasket A, B, C
, standard plate (Ni / Fe) 1 sheets, cleaning fluid (100ml) 1 this, beaker dropper, stirring tube equation (1), fuse, manual |
Option of electrolytic film thickness meter CT-3
| WT |
The following of the wire and the width 1.7mm, for the measurement of small parts requires WT (wire tester). |
Standard accessories
(optional) |
· Positive cathode jig · WT (wire tester)
|
standard
Film thickness meter of Densoku is, JIS (Japan standard industrial) H8501, H8610-8619, STM (American Society for Testing and Materials) B504-82, MIL (US military standard), ISO (International Standard) 2177, DIN (German standard) conform to standards such as 50932,50955, it is an international measuring instrument that has been certified with the US Kokuru Corporation.
Specification of electrolytic film thickness meter CT-3
| Measurement range |
0.006 ~ 300μm |
| Minimum resolution |
0.125μ / sec, or 0.0125μ / sec, 0.00125μ / sec. |
| Body accuracy |
± 1% |
| Unit of measurement |
μm, nm (direct reading by the LED display) |
| Measurement area |
3.4mmφ If you use the A-type gasket
2.4mmφ when using a B-type gasket
if you use the C-type gasket 1.7mmφ |
| Power supply |
AC100V (115V, 200V, 230V), 50 / 60Hz |
| Body dimensions |
H121 × W240 × D181mm |
| weight |
3.0kg (body only) |
(Note) The specifications are subject to change without notice.
Various combinations and electrolytic reagent of the green body and the plating
| Kind of plating |
Electrolyte |
Green body |
| copper |
K-44 |
Iron, aluminum, nickel, permalloy, silver, Kovar, molybdenum, stainless steel,
non-metallic |
| K-52 |
Brass, beryllium copper, lead, zinc die-cast, nickel silver, tin, cadmium |
| nickel |
K-54 |
Iron, aluminum, brass, copper, inconel, molybdenum, tungsten, stainless steel,
non-metallic, chrome |
| Electroless nickel |
K-57 |
Iron, aluminum, Kovar, non-metal, stainless steel, molybdenum |
| Chrome |
K-51 |
Iron, aluminum, nickel, stainless steel, non-metallic, Inconel |
| zinc |
K-46 |
Iron, aluminum, brass, copper, nickel, non-metallic, tin, tungsten |
| tin |
K-47G |
Iron, nickel, nickel silver, nickel silver, permalloy, cadmium, non-metallic |
| K-51 |
Aluminum |
| K-50 |
Copper, brass |
| Silver |
K-44 |
Iron, aluminum, non-metal, permalloy, Kovar |
| K-48 |
Brass, copper, tin, non-metallic |
| K-48G |
Nickel, nickel silver, nickel silver |
| solder |
K-44 |
Iron, aluminum, brass, copper, metallic |
| cobalt |
K-54 |
Iron, brass, copper, metallic |
| brass |
K-44 |
Iron, aluminum, non-metallic |
| Surface treatment solution |
N-64 |
Deposit removal solution after the nickel measurement |
| CS |
For polishing of the dirt off and the resin of the cleaning suspension ... the object to be measured |
|