RKI is proud to offer the next generation of our popular EAGLE portable gas detector. Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO.
The EAGLE 2 available features include a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases; % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor; ppm or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2 (ppm or % volume), methane or hydrocarbons in LEL and % volume ranges;
Optional LEL / ppm H2 specific sensor, methane elimination feature for environmental applications; and a variety of super toxic gases.
Made in U.S.A.
Features
- Monitor up to 6 different gases
- PPM, % LEL, or % Vol. auto-ranging combustible detection
- H2 Specific LEL/PPM detection
- Multilingual (5 languages)
- Powerful long-life pump up to 125’ range
- Low flow pump shut off and alarm
- Methane elimination for environmental use
- Alkaline 16 hours or NiMH 18 hours capability
- Password protection
- Datalogging standard
- Auto calibration / single gas calibration
- Internal hydrophobic dust filter
- External probe with hydrophobic filter
- Ergonomic RFI / EMI / chemical / weather resistant enclosure
- Intrinsically safe design, CSA approval
Specialty Sensors
- PID (Photoionization Detector)
- Low or high range for VOC detection
- Humidity and contamination resistant
- Infrared (IR)
CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC
- Thermal Conductivity (TC) % Vol. H2, % Vol. CH4
- Smart toxic, plug and play sensors NH3, AsH3, Cl2, HCN, PH3, & SO2
Unique EAGLE 2 features include PPM or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2, methane or hydrocarbons in LEL and % volume ranges; PID sensor for detecting high and low ppm levels (0-50 & 0-2,000) of VOC gases; methane elimination feature for environmental applications; and a list of super toxic gases and measurable ranges. The EAGLE 2 has a strong internal pump with a low flow auto pump shut off and alarm, which can draw samples from up to 125 feet. This allows for quick response and recovery from distant sampling locations. The EAGLE 2 will continuously operate for over 18 hours on alkaline batteries or 20 hours on Ni-MH. A variety of accessories are also available to help satisfy almost any application such as long sample hoses, special float probes for tank testing, and dilution fittings, just to name a few. Datalogging is a standard feature for all sensors on all versions.
The EAGLE 2 has a strong internal pump with a low flow auto pump shut off and alarm, which can draw samples from up to 125 feet. This allows for quick response and recovery from distant sampling locations. The EAGLE 2 will continuously operate for over 16 hours on alkaline batteries or 18 hours on NiMH. A variety of accessories are also available to help satisfy almost any application such as long sample hoses, special float probes for tank testing, and dilution fittings, just to name a few. Datalogging is a standard feature for all sensors on all versions.
With its ergonomic design and large glove friendly buttons, the EAGLE 2 offers easy access to controls such as auto calibration, alarm silence, demand zero, peak hold, methane elimination, and a wide variety of other features. Each channel has two alarm levels plus TWA and STEL alarms for toxic channels. The two alarm levels are user adjustable and can be latching or self resetting. Rugged, reliable, easy to operate and maintain, the EAGLE 2 is the solution for just about any portable gas monitoring situation. Also, the display can be set to any of 5 languages: English, French, German, Italian, or Spanish.
|
Enclosure
|
Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP64.
|
|
Dimensions
|
9.5” L x 5.25” W x 5.875” H
|
|
Weight
|
3.8 Lbs (standard 4 gas with batteries)
|
|
Detection Principle
|
Catalytic combustion, electrochemical cell, galvanic cell, infrared, photo ionization detector, and thermal conductivity.
|
|
Sensor Life
|
2 Years under normal conditions.
|
|
Sampling Method
|
Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH
|
|
Display
|
3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time.
|
|
Language
|
Readout can display in 5 languages (English, French, German, Italian, or Spanish.
|
|
Alarms
|
2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and silenceable.
|
|
Alarm Method
|
Buzzer 95 dB at 30 cm, four high intensity LED’s.
|
|
Controls
|
4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors, and many other features.
|
|
Continuous Operation
|
At 70°F, 16 hours using alkaline batteries, or 18 hours using Ni-MH.
|
|
Power Source
|
4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines).
|
|
Operating Temp. & Humidity
|
-20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing.
|
|
Response Time
|
30 Seconds to 90% (for most gases) using standard 5 ft hose.
|
|
Safety Rating
|
Intrinsically Safe, Class I
Groups A, B, C, D.
Approvals: CSA / CE
|
|
Standard Accessories
|
Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter
|
|
Optional Accessories
|
- Dilution fitting (50/50)
- Ni-MH batteries
- Battery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours) with continuous operation function
- Extension hoses
|
|
Warranty
|
Two year material and workmanship, one year for PID sensor
|
Specifications subject to change without notice.
|