Built around RKIs latest smart sensor technology, the SC-01 is a versatile single toxic gas monitor. The smart sensors are interchangeable, with the SC-01 automatically recognizing any sensor change without any set up or configuration changes. The sensors calibration information also stays with each sensor. Weighing only 7.6 ounces, it has many features which set it apart from the competition. For example, it offers sensors for Ammonia (NH3), Arsine (ASH3), Carbon Monoxide (CO), Chlorine (Cl2), Hydrogen Cyanide (HCN), Hydrogen Sulfide (H2S), Phosphine (PH3), and Sulfur Dioxide (SO2). The SC-01s unique extender cable allows the sensor to be attached to the end of a 10 foot cable for remote monitoring and quick response.
Features
- Smart interchangeable sensors
- Wide range of toxic gases
- Unique extender cable for remote monitoring
- Compact (2.5 x 5.2 x 1.2 in.)
- Lightweight, 7.6 ounces
- 250 hours of continuous operation
- Operates on 2 “AA” alkaline batteries
- Audible / visual / vibration alarms
- Datalogging standard
- Impact resistant protective rubber boot
- Intrinsically safe, CSA, C/US classified
Applications
- Utilities
- Personal monitoring
- Refineries / petrochemical
- Chemical plants
- Hazmat response
- Water / wastewater treatment
- Semiconductor plants
The SC-01's large LCD display shows the gas reading, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms that can be set to latching or self-resetting. Controlled by a microprocessor, the SC-01 continuously checks itself for sensor connections, low battery and circuit trouble. The batteries are simple to replace, requiring no tools to access the battery compartment. One set of AA alkaline batteries provides continuous operation for over 250 hours.
The SC-01 is equipped with datalogging capability as a standard feature which communicates through an IR port with an optional Windows¨ based datalogging software program. Calibration intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired.
Specifications
|
Sensor Type
|
ESM-01 Series |
| Detection Principle |
Electrochemical |
| Response Time |
60 Seconds |
| Sampling Method |
Diffusion, optional sensor extender cable |
| Display |
Digital LCD, auto backlight during alarm |
| Alarm Operation |
Latching and reset function |
| Types of Alarms |
Gas alarms: 1st, 2nd, STEL, TWA and OVER
Trouble alarms: Sensor connection, low battery, circuit trouble, and calibration error
|
| Alarm Indication |
Gas alarms: Blinking LED array, intermittent buzzer, blinking gas values, vibration
Trouble alarms: Blinking LED array, intermittent buzzer, display of trouble, vibration
|
Operating Temp.
& Humidity |
-10°C to +40°C (14°F to 104°F) Below 95% RH (non-condensing) |
Continuous
Operation |
More than 250 hours (at 25°C, no alarm) |
| Power |
2 “AA” Alkaline dry cell batteries |
| Safety Rating |
CSA classified, “C/US”, as intrinsically safe. Class I, Division 1, Groups A, B, C, D |
Dimension &
Weight |
2.5” W x 5.2” H x 1.2” D (63 W x 131 H x 31 D mm) 7.6 ounces (215 g) |
| Case Material |
Dust & splash resistant. RFI shielded high impact plastic with protective rubber boot |
| Controls |
Three buttons: POWER, DISPLAY, AIR |
Standard
Accessories |
|
Optional
Accessories |
|
| Warranty |
One year material and workmanship |
| Part Number |
Gas |
Range |
73-0050RK-XXX = SC-01 with an alligator clip
73-0051RK-XXX = SC-01 with a belt clip |
| 73-0050RK-NH3 |
Ammonia (NH3) |
0 - 75 ppm |
| 73-0050RK-ASH3 |
Arsine (ASH3) |
0 - 1.5 ppm |
| 73-0050RK-CO |
Carbon Monoxide (CO) |
0 - 75 ppm |
| 73-0050RK-CL2 |
Chlorine (CL2) |
0 - 3.00 ppm |
| 73-0050RK-HCN |
Hydrogen Cyanide (HCN) |
0 - 15 ppm |
| 73-0050RK-H2S |
Hydrogen Sulfide (H2S) |
0 - 30.0 ppm |
| 73-0050RK-PH3 |
Phosphine (PH3) |
0 - 1.00 ppm |
| 73-0050RK-SO2 |
Sulfur Dioxide (SO2) |
0 - 6.00 ppm |
Specifications subject to change without notice.
|