- BST8-STAT-EIS is a Single Channel Potentiostat/Galvanostat with Electrochemical Impedance Spectroscopy Activated for Battery/Capacitor/Fuel Cell Analysis. It exports the impedance data to a file format to accommodate free third party EIS analysis software. The EIS analysis software is a user-friendly interface that allows selection of the proper scanning parameters, collect the impedance spectra, display data in Nyquist and/or Bode plots and export data in the proper data format for use in EIS analysis software. A brand new laptop with MS Window 8 and the latest version of testing software are included for immediate use.
- Frequency Range : 10mHz ~10KHz
- Capability of DC Bias Offset : Yes
- Compliance Voltage : ±25V
- Max Output Current : ±1A
- Rise Time : 45 µs for 1 Ohm load (0%-100% signal)
- Slew Rate : 0.2 V/us
- Bandwidth : 10 kHz (-3dB, 1Ohm load)
- Applied DC Potential Ranges : ±10VDC
- Applied Potential Resolution : 0.3mV
- Applied Potential Accuracy : < 0.04% FSR
- Current Autoranging : In Galvanostat Mode
- Applied DC Current Range : 4 testing ranges can be selected in the software (10nA~1µA, 1µA~100µA, 100µA ~10mA, 10mA~1A)
- Best Current Resolution : 0.5 nA, 0.003% of FSR
- Applied Current Accuracy : 0.03% of FSR
- Input Bias Current : 500 pA
- Input Impedance : 250 GΩ parallel to 3 pf
- Current raise rate Galvanostat : >64 A/ms
- IR Compensation : Manual, Potentiostat Mode
- External Control : 1 AO, 1 AI, 2 DO
- Maximum Scan Rate Potentiostat : 500 V/s
- Maximum Update Rate : 4us