Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Tủ sấy DZF-6050-HT MTI Corporation

Mã sản phẩm: DZF-6050-HT
Sử dụng cho Model:
Hãng SX: MTI Corporation
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Tủ sấy
Model: DZF-6050-HT
Hãng: MTI Corporation

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

- The DZF-6050-HT is CE certified and UL/CSA Standard oven. This oven is using an advanced temperature controller which comes with a RS485 computer communication port and is able to be computerized. Also it can be heated up to 500°C and able to hold the temperature for long period with the support of compact chilling water recirculating system. A 500-5000ml flow meter is installed in the front panel for user to simply control and create a gas environment in the chamber. All necessary accessories are in the package including vacuum pump, chiller, fittings, hoses, etc.
- Voltage : 208 -240VAC 50/60HZ (Power cable is included w/o plug)
- Power : 2200W
- Heating Temp : Continuous:   50~400°C <= 1 hour for staying at 500°C
- Temperature Controller
   + 30 segments programmable
   + Built-in over-temperature protection
   + +/- 5°C accuracy
   + Temperature uniformity: +/-5°C @ 100°C, 25" Hg at center 8"x7" area only 
   + Built in RS485 communication port is installed for PC connection.  Please order PC software(EQ-MTS02) and communication chip for  PC control function at extra cost
- Chamber and Door : 
   + Chamber dimensions: 415 mm x 345 mm x 370 mm  ( 16.3 x 13.5 x 14.5",  53 Liter )
   + The chamber is structured with stainless steel and welded with bracing pieces.
   + Aluminium Plate with thermal insulation
   + Silicone door gasket and positive latch door ensure the good sealing
   + 2 stainless steel shelves are included to facilitate processing efficiency.
   + The water cooling jacket is built inside the oven door flange to keep silicone O-ring temperature below 200oC when oven temperature higher 
- Fittings & Connectors : 
   + One KF25D vacuum port is used for quick connection to vacuum pump. 
   + Two water/coolant inlets connect the chiller. (tubes are included)
   + One 1/4" Swagelok tube fitting is for inert gas supply.
   + One needle valve is used to control the input gas.
- Gas flowing/purging : 
   + A precise flow meter is installed in the front panel which ranges from 500 ~ 5000ml/min. 
   + The gas is able to be continuously flowing into the chamber at a constant flow rate defined by user during operation.
   + The oven can be purged by inert gas before operation.
- Vacuum Pump : 
   + One Rotary Vane Vacuum Pump with Exhaust Filter, Bellows & KF-D25 Inlet is included.
   + Vacuumn level of oven after pumping < 133pa (2 torr)
   + Power: 0.4KW / 0.37KW
   + Please click the pic for more spec.
- Dimensions & Weight : 48" x 40" x 42"; 420 lbs

Bình luận