- Chamber and Door :
+ The chamber is structured by Stainless Steel (1Cr18Ni9Ti)
+ Inner Chamber size: 300mm(L) x 300mm(W) x 280mm(H); (12 x 12 x 11", 25 Liter)
+ A good vacuum seal is achieved by silicone door gasket and positive latch door
+ 2 stainless steel shelves are included to facilitate processing efficiency.
+ A closeable 4"x4" quartz window is built on the front door to allow you observe samples inside clearly, and keep chamber temperature more uniform when close cover
+ Door flange with water cooling jacket to allow silicone sealing O-ring using for long tine
+ One Digital Temperature Controlled Recirculating Water Chiller is included for water cooling
- Working Voltage : 208 - 240VAC (20Amps circuit breaker is required)
- Power Consumption : 1600 W
- Recommended Heating Rates :
+ 5 ºC/min: 0ºC - 100ºC
+ 5 ºC/min: 100ºC - 200ºC
+ 5 ºC/min: 200ºC - 300ºC
+ 3.4 ºC/min: 300ºC - 400ºC
- Thermocouple : K type
- Working Temperature : RT ~400°C for continuous
- Temperature Controller :
+ 30 segments programmable temp. controller
+ Built-in over-temperature protection
+ Temperature uniformity: +/-5°C @ 100°C, 25" Hg at center 6"x6" area only
+ PID precise temperature control
+ Temperature Stability: +/-1°C
+ Built in RS485 communication port is installed for PC connection. Please order PC software (EQ-MTS02) and communication chip for PC control function at extra cost.
- Vacuum Level :
+ Vacuumn level of oven after pumping < 133pa (1 torr)
+ One Rotary Vane Vacuum Pump with Exhaust Filter, Bellows & KF-D25 Inlet is included
- Float Meter : 200~2000ml/min
- Fittings & Valve :
+ Gas inlet: 1/4" stainless steel fitting port with needle valve
+ Vacuum Port: KF-25
+ Water Cooling Inlet & Outlet
+ 16 L/ min water cooling is required
+ Φ6.35mm water cooling pipe
- Dimensions : 700mm(L) x 500mm(W) x 525mm(H)
- Shipping Weight & Dimensions : 48"(L) x 40"(W) x 31"(H); 320 Lbs after crating