Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Precision LCII Ferroelectric Test System Radiant Technologies

Mã sản phẩm:
Sử dụng cho Model:
Hãng SX: Radiant Technologies
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
The Precision LCII is Radiant's answer to a growing need for affordable characterization equipment.  The Precision LCII is an ideal general purpose tester with a broad test range for thin films and bulk ceramics.  The Precision LCII  tester has a frequency rating of 5KHz at +/-200V built-in to the system.    The Precision LCII Test System  makes testing of  thin films and bulk ceramics a fast and simple process.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Tester Parameter

LC II

Voltage Range (built-in drive voltage)

±10V, ±30V, ±100V, ±200V or ±500V built-in

Voltage Range with an external amplifier and high voltage interface (HVI)

10KV

Number of ADC Bits

18

Minimum Charge Resolution

<10fC

Minimum Area Resolution (assuming 1 ADC bit = 1μC/cm2)

<1μ2

Maximum Charge Resolution

276μC

Maximum Area Resolution (assuming saturation polarization = 100μC/cm2)

2.76cm2

Maximum Charge Resolution with High Voltage Interface (HVI)

27.6mC

Maximum Area Resolution (assuming saturation polarization = 100μC/cm2) w/o HVI

>100cm2

Maximum Hysteresis Frequency

5KHz @ 10V

 

5KHz @ 30V

 

5KHz @ 100V

 

5KHz @ 200V

 

2KHz @ 500V

Minimum Hysteresis Frequency

0.03Hz

Minimum Pulse Width

50μs

Minimum Pulse Rise Time (5V)

40μs

Maximum Pulse Width

1s

Maximum Delay between Pulses

40ks

Internal Clock

25ns

Minimum Leakage Current (assuming max current integration period = 1 seconds)

1pA

Maximum Small Signal Cap Frequency

20KHz

Minimum Small Signal Cap Frequency

1Hz

Output Rise Time Control

103 scaling

Input Capacitance

-6fF

Electrometer Input All Test Frequencies for all test at any speed

Yes

* The minimum area resolution under actual test conditions depends upon the internal noise environment of the tester, the external noise environment, and the test jig parasitic capacitance.
*** Tester specifications are subject to change without notice.

Bình luận