Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Rohde-schwarz - Mixed Signal Option, 400 MHz RTM-B1

Mã sản phẩm: RTM-B1
Sử dụng cho Model:
Hãng SX: Rohde - Schwarz
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

R&S®RTM-B1 MSO option is a powerful tool for debugging digital designs with a sampling rate of up to 5 GSa/s and a memory depth of up to 20 MSa. With this high sampling rate over the entire memory, signal problems even far from the trigger point can be identified and still analyzed in detail. The MSO option comes with an Activity View that continuously shows the status of all logic channels at the right top of the screen.

Features & Benefits

  • Precision measurement: up to 5 Gsample/s sampling rate

    The R&S®RTM2000 oscilloscopes' sampling rate of up to 5 Gsample/s makes it possible to accurately measure the timing of logic signals. Since the signals can be precisely time-referenced to one another, timing and clock errors can be detected with greater ease, e.g. on serial or parallel bus signals. The R&S®RTM2000 oscilloscopes use the high sampling rate over the entire acquisition time, ensuring high time resolution even for long acquisition cycles.

  • Deep memory: acquire long signal sequences

    Logic signals are stored in the R&S®RTM2000 with up to 20 Msample. This long acquisition cycle in combination with the high sampling rate makes it easy to detect timing errors even far from the trigger point, for instance.

  • Better overview: VirtualScreen

    With comparable oscilloscopes in this class, the logic signal display is typically superimposed on the analog signal display. This makes viewing and analysis more difficult. The VirtualScreen of the R&S®RTM2000 oscilloscopes uses a different approach: It doubles the usable screen area for clear display of the channels with no overlapping. Math, reference and logic signals can be displayed above or below the analog channels.


  • Everything at a glance: activity display

    The R&S®RTM2000 oscilloscopes' activity display provides a clear overview of the current status of all logic channels (high, low, toggle) regardless of the trigger settings. This allows the user to always see the status of all logic signals at a glance.

    Specifications

    MSO option
    Digital channels   16 (2 logic probes)
    Input impedance   100 kΩ || 4 pF
    Sampling rate 2 logic probes connected 2.5 Gsample/s per channel
      1 logic probe connected 5 Gsample/s per channel
    Acquisition memory 2 logic probes connected 10 Msample per channel
      1 logic probe connected 20 Msample per channel



Bình luận