Frequency range |
with the R&S®SGS-B106 option |
1 MHz to 6 GHz |
|
with the R&S®SGS-B106 and R&S®SGS-B112 options |
1 MHz to 12.75 GHz |
|
with the R&S®SGS-B106V option |
80 MHz to 6 GHz (I/Q mode)
1 MHz to 6 GHz (CW mode) |
|
with the R&S®SGS-B106V and R&S®SGS-B112V options |
80 MHz to 12.75 GHz (I/Q mode)
1 MHz to 12.75 GHz (CW mode) |
Setting time |
with PCIe remote control |
< 500 μs |
Input frequency for external reference |
|
10 MHz, 100 MHz, 1000 MHz |
Level |
Specified level range |
|
–10 dBm to +15 dBm (PEP) 1) |
|
with the R&S®SGS-B26 option |
–120 dBm to +15 dBm (PEP) 1) |
Level error |
Setting Characteristic: AUTO; temperature range from +18 °C to +33 °C |
|
1 MHz ≤ f ≤ 3 GHz |
< 0.5 dB |
|
3 GHz < f ≤ 12.75 GHz |
< 0.9 dB |
Output impedance VSWR in 50 Ω system |
in full frequency range,
Setting Characteristic: AUTO |
< 2.0 |
|
in full frequency range,
with the R&S®SGS-B26 option |
< 1.8 |
Setting time |
with PCIe remote control,
Setting Characteristic: AUTO |
< 500 μs |
Spectral purity |
Harmonics |
level ≤ 8 dBm, CW, I/Q wideband OFF |
< –30 dBc |
Nonharmonics |
level > –10 dBm 2), offset > 10 kHz from carrier, f ≤ 1.5 GHz |
< –76 dBc |
Subharmonics |
level > –10 dBm 2), f ≤ 3 GHz |
< –76 dBc |
Wideband noise |
1 MHz ≤ f ≤ 6 GHz and 10 MHz carrier offset, 6 GHz < f ≤ 12.75 GHz and 30 MHz carrier offset, AUTO mode, level > 5 dBm, 1 Hz measurement bandwidth, CW |
< –145 dBc |
SSB phase noise |
20 kHz carrier offset, 1 Hz measurement bandwidth |
|
f = 1 GHz |
< –126 dBc, –130 dBc (typ.) |
|
f = 10 GHz |
< –106 dBc, –110 dBc (typ.) |
I/Q modulation |
I/Q modulator bandwidth (RF) |
100 MHz < f ≤ 2.5 GHz, I/Q wideband |
40 % of carrier frequency |
|
2.5 GHz < f ≤ 6 GHz, I/Q wideband |
1 GHz |
Error vector |
measured with 16QAM, filter root cosine α = 0.5, 10 kHz symbol rate |
|
f > 80 MHz, RMS |
< (0.4 % + 0.2 % × f/GHz) |
ACLR |
WCDMA 3GPP FDD, TM 1/64 |
> 67 dB, 69.5 dB (meas.) |
Baseband bypass mode |
Frequency range |
|
1 MHz ≤ f ≤ 80 MHz |
Specified level range |
|
–5 dBm to +15 dBm |
|
with the R&S®SGS-B26 option |
–120 dBm to +15 dBm |
Remote control |
using Rohde & Schwarz instrument driver |
PCIe (single lane) |
|
using SCPI 1999.5 or compatible command sets |
Ethernet (TCP/IP) 10/100/1000BaseT |
|
using SCPI 1999.5 or compatible command sets |
USB 2.0 |
General data |
Power consumption |
|
70 W (meas.) |
Dimensions |
W × H × D |
250 mm × 52.5 mm × 401 mm
(9.84 in × 2.07 in × 15.79 in)
1 HU, ½ 19" rack width |
Weight |
when fully equipped |
4.0 kg (8.82 lb) |