Key Facts
- Optional spectrum analysis and digital communications standards
- Bidirectional test set for displaying all four S-parameters
- R&S®ZVL3-75: 75 Ω vector network analyzer for TV and CATV measurements
- Multitrace display for displaying all relevant parameters
- Distance-to-fault measurement for detecting cable faults
- Time domain analysis
- USB connector for R&S®NRP-Z power sensor series for precise power measurements
- Internal battery and 12 V DC operation
- Small, compact, lightweight and portable (< 7 kg)
Features & Benefits
- Full one-port (OSM), full two-port (TOSM), and one-path two-port calibration
- Measurement of S-parameters, impedance, admittance, and stability
- Output of results as Smith chart, inverted Smith chart, magnitude and phase, polar diagram, real, imaginary, group delay, VSWR
- Unlimited number1) of traces and channels; overlay display of traces also of different channels in a single diagram
- Trace evaluation: max, min, peak-to-peak, RMS, mean, standard deviation, electrical length, phase delay
- Bandpass filter evaluation in terms of center frequency, bandwidth, ripple, quality factor, attenuation, etc.
- Optional spectrum analyzer functionality (R&S®ZVL-K1) with full network analyzer capability available at the same time
Brief Description
The R&S®ZVL is a cost-efficient, powerful, and portable network analyzer in the compact class, and is therefore ideal for use in development, production, and service. It is the only instrument to combine the functions of a network analyzer, spectrum analyzer, and power meter in a single box, and will thus tremendously increase your work efficiency.
Specifications
Network Analysis
| Frequency range |
9 kHz (typ. 5 kHz) to 3 GHz/6 GHz/13.6 GHz |
| Measurement time (201 test points at 100 kHz IF bandwidth, with normalization calibration) |
<50 ms |
| Data transfer time (201 test points) |
|
| |
Via RSIB over 100 Mbit/s LAN |
1.5 ms |
| Dynamic range at 10 Hz measurement bandwidth (20 MHz to 3 GHz) |
>115 dB, typ. 123 dB (ZVL3,ZVL6)
> 100 dB, typ. 105 dB (ZVL13) |
| Output power range |
–50 dBm to 0 dBm, typ. –60 dBm to +10 dBm (ZVL3, ZVL6 and ZVL3-75) |
| Measurement bandwidths |
10 Hz to 500 kHz in 1/2/5 steps |
| Trace noise |
< 0.005 dB (rms above 10 MHz) |
| Receiver step attenuators (maximum nominal input power) |
0 dB to 30 dB |
| Number of channels, diagrams, traces |
>1001) |
| Number of test points per trace |
2 to 4001 |
| Operating system |
Windows XP Embedded |
| Weight (without battery) |
<7 kg (15.43 lb) |
| 1) Limited by available RAM capacity |
Spectrum Analysis (R&S®ZVL-K1 option)
| Frequency range |
9 kHz to 3 GHz/6 GHz/13.6 GHz |
| Frequency uncertainty |
1 × 10–6 |
| |
With R&S®FSL-B4 option |
1 × 10–7 |
| Resolution bandwidths |
|
| |
Standard |
300 Hz to 10 MHz in 1/3 steps, 20 MHz at zero span |
| |
With R&S®FSL-B7 option |
(1 Hz) 10 Hz to 10 MHz in 1/3 steps |
| Video bandwidths |
10 Hz to 10 MHz |
| I/Q demodulation bandwidth |
20 MHz |
| SSB phase noise at 500 MHz |
typ. –103 dBc (1 Hz) at 10 kHz carrier offset |
| Displayed average noise level |
|
| |
Without preamplifier at 1 GHz |
<–140 dBm (1 Hz) |
| |
With preamplifier at 1 GHz |
<–156 dBm (1 Hz), typ. –163 dBm (1 Hz) |
| Third-order intercept (TOI) |
>+5 dBm, typ. +12 dBm |
| Detectors |
max/min peak, auto peak, rms, quasi peak, average, sample |
| Level measurement uncertainty (95% confidence level) |
<0.5 dB |
|