Key Facts
- Frequency options from 9 kHz to 3.2 GHz/6 GHz
- Optional baseband generator with realtime coder and arbitrary waveform generator for maximum flexibility
- Optional ARB-only baseband generators as cost-saving alternatives
- Support of 3GPP LTE FDD and TDD, 3GPP FDD/HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, WLAN, WiMAX™ and all other important digital standards
- Fully fledged GNSS simulator with GPS, Glonass and Galileo
- RF bandwidth of up to 160 MHz with internal baseband generator
- I/Q modulator with 528 MHz RF bandwidth
- Optimized for high production throughput
- Prepared for aerospace and defense applications
- Low cost of ownership due to simple service concept
Brief Description
The R&S®SMBV100A offers excellent RF performance along with very high output level and short setting times. At the same time, the R&S®SMBV100A can be equipped with an internal baseband generator to allow generation of a number of digital standards (e.g.LTE, LTE-Advanced, IEEE802.11ac, GNSS). The wide frequency range from 9 kHz to 6 GHz covers all of the important bands for digital modulation.
Specifications
| Frequency |
| Range |
R&S®SMBV-B103 |
|
| |
CW mode |
9 kHz to 3.2 GHz |
| |
I/Q mode |
1 MHz to 3.2 GHz |
| |
R&S®SMBV-B106 |
|
| |
CW mode |
9 kHz to 6 GHz |
| |
I/Q mode |
1 MHz to 6 GHz |
| Setting time |
SCPI mode, ALC state ON, CW mode |
<3 ms |
| |
SCPI mode, ALC state ON, I/Q mode |
<5 ms |
| |
SCPI mode, ALC state Table |
<2.5 ms |
| |
SCPI mode, ALC state S&H |
<7 ms |
| |
List mode |
<1 ms |
| Level |
| Maximum output power |
1 MHz < f = 6 GHz |
>+18 dBm (PEP) |
| Absolute level error |
200 kHz < f = 3 GHz |
<0.5 dB |
| Additional level error with ALC OFF, S&H |
This mode is used with I/Q modulation and pulse modulation. |
<0.25 dB |
| Output impedance VSWR in 50 Ω system |
200 kHz < f = 6 GHz |
<1.8 |
| Setting time |
SCPI mode, ALC state ON, CW mode |
<2.5 ms |
| |
SCPI mode, ALC state ON, I/Q mode |
<5 ms |
| |
SCPI mode, ALC state Table |
<2.5 ms |
| |
SCPI mode, ALC state S&H |
<7 ms |
| |
List mode |
<1 ms |
| Reverse power |
1 MHz < f = 1 GHz |
50 W |
| |
1 GHz < f = 2 GHz |
25 W |
| |
2 GHz < f = 6 GHz |
10 W |
| Spectral purity |
| Harmonics |
f > 1 MHz; CW, level = 8 dBm |
<–30 dBc |
| Nonharmonics |
CW, level > –10 dBm, >10 kHz carrier offset, f = 1500 MHz |
<–70 dBc
(<–84 dBc typ.) |
| SSB phase noise |
20 kHz carrier offset, 1 Hz measurement bandwidth, CW |
|
| |
f = 100 MHz |
<–141 dBc
(–147 dBc typ.) |
| |
f = 1 GHz |
<–122 dBc
(–127 dBc typ.) |
| |
f = 6 GHz |
<–106 dBc
(–112 dBc typ.) |
| Wideband noise |
attenuator mode AUTO for level > 5 dBm, >10 MHz carrier offset, 1 Hz measurement bandwidth, CW |
<–142 dBc |
| Supported analog modulation modes |
| Amplitude modulation |
|
standard |
| Frequency/phase modulation |
|
standard |
| Maximum FM deviation |
f > 3 GHz |
16 MHz |
| Maximum φM |
f > 3 GHz |
160 rad |
| Pulse modulation |
|
optional,
with R&S®SMBV-K22 |
| On/off ratio |
|
>80 dB |
| Rise/fall time |
10 % to 90 % of RF amplitude |
<20 ns, 4 ns (typ.) |
| Minimum pulse width |
using the optional
R&S®SMBV-K23 pulse generator |
10 ns |
| I/Q modulation |
Supported systems
(with additional options) |
R&S®SMBV-B10 baseband generator required |
GSM/EDGE/EDGE evolution, 3GPP FDD incl. HSPA/HSPA+,TD-SCDMA, CDMA2000®, 1×EV-DO, EUTRA/ LTE, WiMAX IEEE 802.16-2004, Cor1-2005, 802.16e-2005 and 802.16Rev2/D3 , WLAN IEEE 802.11a/b/g/n/ac, NFC A/B/F, Bluetooth®, GPS, Glonass, Galileo, HD Radio™3), XM Radio, Sirius Radio, FM Stereo / RDS, DAB / T-DMB, DVB-H/DVB-T, Tetra Release 2, multicarrier CW |
| Realtime custom digital modulation |
R&S®SMBV-B10 baseband generator required |
ASK, FSK, BPSK, QPSK, QPSK 45° offset, OQPSK, p/4-QPSK, p/2-DBPSK, p/4-DQPSK, p/8-D8PSK, 8PSK, 8PSK EDGE, 16QAM, 32QAM, 64QAM, 256QAM, 1024QAM |
| I/Q modulator bandwidth |
internal |
60 MHz, 120 MHz or 160 MHz, depending on baseband option |
| |
external |
>500 MHz |
| Maximum waveform length |
32 Msample |
| |
with R&S®SMBV-K511 option |
256 Msample |
| |
with R&S®SMBV-K512 option |
1 Gsample |
| DAC resolution |
|
|
| ACLR |
WCDMA 3GPP FDD, TM 1/64 |
69 dBc (typ.) |
| EVM |
WCDMA 3GPP FDD, TM 1/64 |
0.4 % (meas.) |
| |
WLAN IEEE 802.11 ac, 160 MHz |
0.44 % (meas.) |
| |
EUTRA/LTE |
0.4 % (meas.) |
| Connectivity |
| Remote control |
|
IEC/IEEE, Ethernet (LAN), USB |
| Peripherals |
|
USB 2.0 |
2) PEP = peak envelope power.
3) HD RadioTM is a proprietary trademark of iBiquity Digital Corp. |