- Equipped with an SD card slot, it records the measured data on a separately available SD card. It facilitates data processing using computers.
- When used with the KS-2100 sensor, it immediately indicates the failure of the sensor on the screen. It facilitates the recognition of a sensor error and produces a control output to an external system.
- It may be connected with sensors for a maximum of two channels. It displays the values measured on both channels on a real-time basis and records data.
Incorporating a high visibility full-color touchscreen panel, it provides ease of recognizing the current conditions and enables intuitive operation.
- The KS-2001A air purge sensor applies internal pressure inside the sensor by supplying air to prevent the intrusion of powder or paint mist into it. It paves the way for high durability in static electricity measurement and monitoring in environments where static electricity measurement was previously impossible.
- A combination of the KS-2001 or KS-2001A sensor with the KS-300A safety barrier may be used in hazardous areas (explosion-proof areas).
With the ability to select between Japanese, English and Chinese as the display language, it provides reassurance in overseas use.
Thông số kỹ thuật
- Storage functions: + Supported media: SD card with a maximum capacity of 32 GB (Class 10 recommended), FAT32
+ Data format: .csv (one file to be added for each of the six time slots into which 24 hours are divided)
- Power supply: 100 V to 240 V AC, 50/60 Hz
- Power consumption: 15 VA (at maximum)
- Ambient temperature and humidity: 0 to 40 degrees centigrade, 65% Rh or less (no condensation)
- Display ranges: + KS-2001 0～±20.0kV／0～±50.0kV
+KS-2001A 0～±20.0kV
+ KS-2100 0～±2000V／0～±20.0kV
- Measurement precision: ±10% of Reading
- Number of channels: 2 (at maximum)
- Measurement cycles: 100ms、500ms、1000ms（1s）
- Analog output: + Voltage: 0 to ± 200 mV / 0 to ± 500 mV (when the 50 kV range is selected)
+ Current: 4 mA to 20 mA
- Number of alarm settings:+ Up to two settings on each channel
+ (The preset value depends on the measurement range setting on each channel.)
- Alarm records: The last 10 alarms displayed on the alarm summary screen (cleared once the power is turned off)
Alarm output: Relay contact output at the occurrence of an alarm (individual settings and channels are independent)
- Monitor signal during setting: Relay contact output during setting (output produced during the RUN indication)
- Sensor error signal: Relay contact output during the output of a sensor error signal (for the KS-2100 only)
- External measurement control signal: Measurement enabled or disabled by dry contact signal control from outside
- Relay for control output: Contact capacity: 250 V AC and 5 A / 30 V DC and 5 A, Output type 1a
- Display functions: A 4.3-inch TFT liquid crystal panel with touchscreen functions
- Display languages: apanese, English and Chinese (simplified or traditional)
- Grounding: Type A grounding
- Dust: 0.1 mg or less per m3 (free of conductive dust)
- Place of use: Safe indoor spaces
- Mass: Approx. 3.0 kg (excluding the sensor and the safety barrier)
Xem thêm: Thiết bị đo tĩnh điện KSR-1201/KSR-1001 Kasuga