- Since the sensor is small, it can be installed in a narrow space inside a manufacturing device for continuous monitoring.
- Permits alarm setting, which means it can be interlocked with all types of manufacturing devices so that alarm signals are transmitted to the device when the set value is exceeded.
- This single unit can be connected with wide potential sensors (KS-2100) via up to two channels, allowing building of a static monitoring system at low cost.
- Comes equipped with a newly developed circuit for failure diagnosis of the surface potential sensor, meaning it quickly detects failure of the sensor due to shock, etc. and outputs signals indicating the failure to an external device.
- Can also be used to check the effectiveness of an ionizer or for its management.
- Permits switching between ranges, allowing measurement over a wide range from low potential to high potential.
Thông số kỹ thuật
- Display range: Range 1: ±1 - ±1999V
- Range 2: ±0.01 - ±19.99kV
- Analog output: 0 - ±5V
- Control setting: Independent settings of two channels
- Control output: Open collector (control setting output and sensor failure output)
- Power supply: DC12-24V or dedicated AC adapter (AC100V, optional)
- Consumption current: 500mA(DC12 - 24V)
- Operating environment: Temperature: 0°C-40°C,Humidity: 65% RH or below (no condensation)
- Mass: Approx. 580 g (including attachment bracket)
Xem thêm: Thiết bị đo tĩnh điện KS-2100 Kasuga