The F6100 Safe Air Monitor is the ideal instrument for those requiring continuous monitoring of their breathing-air supply. Supplied with a wall mounting kit, connection hose and coupling the F6100 is designed to be connected via a T fitting to the breathing-air supply. Once set up the instrument will continue to monitor and data log the air quality at user defined intervals validating the air quality against a range of alternative international standards. In the UK this ensures complete compliance with the relevant requirements of COSHH.
The F6100 incorporates electronic cells for measuring carbon monoxide, carbon dioxide, and oxygen. Moisture levels within the breathing air are measured by a dewpoint sensor.
The instrument then displays the moisture content in pressure or atmospheric dewpoint levels, as well as providing the concentration in mg/m3 . It also includes digital airline pressure and ambient temperature readings.
Oil measurements are completed using the Draeger Impactor, which is inserted into a test port on the instrument. The F6100 provides a prompt to the user whenever an oil Impactor test is required and the time
interval can again be defined by the user in the set up. The Impactor has no glass or hazard components and can test for all known synthetic and mineral oils. This port is also compatible with a range of additional Draeger chemical reagent tubes, with test times which can be programmed via the menu, to identify other potential contaminants.