Specifications
3,000 amp AC magnetizing current capability at contacts
Demag—One Touch decaying AC
Duty cycle 0.5 seconds on, 10 seconds off (5% with maximum of 2 seconds)
Off time between magnetizing shots increases for shot time set above 0.5 seconds to maintain 5% duty cycle
54 inch (137 cm) headstock/tailstock capacity
Infinitely variable current control
Available Voltages: 230, 380, 415, 460, 575, 50 or 60 hertz, single phase power
Recommended 20 Gallon (75 Liter) Tank Fluid Capacity
Minimum 80 PSI with 5 SCFM capability
89” (224 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation
Optional Features
16” coil (41 cm) w/raising block up-grade (In lieu of 12” coil)
Rotating Contacts (70 lb. part capacity; N/A w/12" coil or Auto-Bath; reduces part capacity by 9")
NRTL Certification to CSA C22.2 No. 61010-1
Dual Palm Button
Auto-Bath
Automatically applies magnetic particle bath to the part
Engage/Disengage switch
Adjustable stroke length up to 22 inches
Automatic mag shot after Auto-Bath
Automatic bath shut off, no flow when bath in retracted position
Articulating spray nozzles
Auto-Mag
Automatically clamps part, initiates magnetizing shot, then unclamps part
Pneumatic Tailstock
Lever for operator to push which moves the tailstock up and down the rail
Ratchet to manually lock down once in final position
Configure Unit for 102" Part Capacity
Recommended 32 Gallon (122 Liter) Tank Fluid Capacity
136” (346 cm) x 41” (104 cm) Foot Print, allow 24” (61 cm) per side for ventilation
Configure Unit for 146" Part Capacity
Recommended 55 Gallon (209 Liter) Tank Fluid Capacity
180" (458 cm) x 41" (104 cm) Foot Print, allow 24" (61 cm) per side for ventilation