Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị phát hiện rò rỉ khí gấy cháy Intellasense III 55975 Mastercool

Mã sản phẩm: 55975
Sử dụng cho Model:
Hãng SX: Mastercool
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Thiết bị phát hiện rò rỉ khí gấy cháy Intellasense III 55975 Mastercool

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

- At the heart of this leak detector is a new low power metal oxide gas sensor with superior performance properties such as lower current consumption and sensor longevity. The new sensor is characterized by high sensitivity and fast response upon detecting the presence of extremely small levels of chlorofluorocarbon gases. For this reason, this sensor was selected and integrated into the 55975 Combustible Gas Leak Detector.
- In addition, a powerful microprocessor was integrated into the design that automatically selects the best operating condition for the sensor to ensure optimum performance throughout its life.
- IntellaSense III Combustible Gas Leak Detector comes in a blow molded case with 2 “C” batteries, leak test vial and replacement filters.

- Detects combustible gases (see below)
- Heated tin oxide sensing element
- 2000 hour sensor life
- Less than 1 second respond time
- 50 – 1000 ppm ultimate sensitivity
- Battery: 2 “C” Alkaline 6000 mAh batteries
- Operating Temperature Range: 0˚F to 120˚F
- Intelligent tip 15″” inch probe length with environment sensing element to  eliminate the potential of false alarms
- Six vertical LED display with enabled selectively (red, yellow or green) to display information to the user such as the relative signal level of the detected leak, the selected sensitivity range (low/medium or high) of the unit, diagnostic information such as low battery, interference/wait, contaminated atmosphere readiness of the unit or fault conditions of the unit
- Keypad control with ON/OFF button (push-on/push-off), Volume/Mute button (high, low or mute), Sensitivity button for high, medium and low sensitivity level selection and Peak button when multiple leaks are suspected (push enable/disable)

Bình luận