Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Ampe kìm đo dòng điện FCT-10B Soukou

Mã sản phẩm: FCT-10B
Sử dụng cho Model:
Hãng SX: Soukou
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Feature

■ adopt a clamp-type current sensor Rogowski system of freely bendable structure 
■ 0.01A cable up to ~ 2000A, can be measured it can be less susceptible clamp an influence on the shape of the bus bar 
leakage current of mA units can be measured not.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Specification


Use power Single 36 dry battery (about 100 hours of continuous use time)
Measurement function Alternating current
display 3-digit 1/2 7 segment large-sized liquid crystal display device
Measurement range 2000mA / 20/200 / 2000A
Measurement method Effective value conversion method of the mean value measurement



Measurement of function


range resolution Tolerance (filter ON) Tolerance (filter OFF①) Tolerance (filter OFF②)
2000mA 1mA ± 3% rdg ± 10dgt ± 5% rdg ± 10dgt ± 8% rdg ± 10dgt
20A 0.01A ± 3% rdg ± 5dgt ± 5% rdg ± 5dgt ± 8% rdg ± 5dgt
200A 0.1A ± 3% rdg ± 5dgt ± 5% rdg ± 5dgt ± 8% rdg ± 5dgt
2000A 1A ± 5% rdg ± 5dgt ± 8% rdg ± 5dgt ± 10% rdg ± 5dgt

Temperature 23 ℃ ± 5 ℃, 80% humidity or less, CT If calibration bus bar is in the center (FCT-10B) 
- tolerance of filter OFF①50 / 60Hz, filter OFF② (45 ~ 1kHz)


Sampling rate 2.5 times / sec.
Peak hold Display the value of 1 / √2 of the peak value in the response time 100Ms 
* hold function, numerical value with the passage of time because by the analog hold will decrease.
Low-pass filter Cut the high frequency in the filter switch ON. (Second-order LPF, the cut-off 150Hz)
Waveform output terminal Each range FS2Vrms (3.5φ earphone jack)
Waveform output accuracy Each range ± 5% FS to the display value (. 2000A range is ± 8% FS)
Recorder output terminal Each range FSDC2V (3.5φ earphone jack)
Recorder output accuracy Each range ± to the display value of 3% FS
Battery Check When the power switch to the battery check, display the battery voltage to the display device
External dimensions 70 (D) × 158 (W) × 105 (H)
weight About 500g (including battery)

Bình luận