Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị kiểm tra relay OCR-25CVG Soukou

Mã sản phẩm: OCR-25CVG
Sử dụng cho Model:
Hãng SX: Soukou
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Feature


■ Precision Class (Class 0.5) is OCR tester equipped with a meter. 
■ output external connection is also possible to use the terminal

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Specification (measuring section)


Test switch OCR · GCR / DGR / VR / breakdown
Current output AC0 ~ 50A
ammeter AC0.1 / 0.25 / 0.5 / 1 / 2.5 / 5/10/25 / 50A / SHORT 
with moving coil type 0.5 grade mirror true effective value conversion method
The withstand voltage secondary current switching Transformer / charge / reactor / OFF 
5/10 / 25A (1 primary current)
Voltage output AC30 / 150/300/500 / 1000V (40VA)
voltmeter AC30 / 150/300/500 / 1000V 
with moving coil-shaped 0.5 grade mirror true effective value conversion method
resistance 0 / 0.5 / 1/2/4/10/15/20/100/200 / 400Ω
External dimensions 326 (D) × 414 (W) × 235 (H)
weight 14kg
accessories Test code set (with storage bag) manual 1 each case cover



Specifications (power supply unit)


Use power AC100V ± 10V 50 / 60Hz
Maximum rating AC15A 30-minute rating (at the time of the breakdown voltage test output) 
AC50A 30 seconds rated (overcurrent and land絡継when electronics output)
Output voltage AC0 ~ 130V
counter 0 ~ 199.999sec resolution 1Ms 
200 ~ 1999.99Sec resolution 10Ms 
(with automatic carry function)
Counter accuracy 0.01 Pasento rdg ± ± ± 1Dgt 5Ms ± ⊿T 
⊿T: each error of the stop signal 
contacts, DC voltage 1Ms ± 
AC voltage (5 ~ 10V) ± 5Ms 
AC voltage (10 ~ 20V) ± 2.5Ms 
AC voltage (more than 20V) ± 1ms 
self-power ± 3ms 
case of ※ stop due to self-supply, depends on the supply load state of the power supply (back electromotive force due to the rotation device, etc., the residual voltage of the capacitor, etc.). The above accuracy, power supply of the counter is the accuracy of to completely cut off.
Stop signal Contact: a contact, b contact automatic detection 
voltage: direct current, alternating current with 10 ~ 220V applied, remove 
the self-power: there is no power at the same time tester and the display time for about 5 minutes (the relay is operated, it is that the counter is stopped. ) 
* count start from 600 seconds (10 minutes from the start) at the time that elapsed, the operation buzzer, the operation lamp will operate for 10 seconds.(Timer function for pressure test) 
* with automatic reset function
Auxiliary power AC100V (10A) · DC110 / 48 / 24V (30W)
Overcurrent cutoff Test state release at about 16.5A during the pressure test
External dimensions 326 (D) × 370 (W) × 235 (H)
weight 13kg

Bình luận