Specification (measuring section)
| Test switch |
OCR · GCR / DGR / VR / breakdown |
| Current output |
AC0 ~ 50A |
| ammeter |
AC0.1 / 0.25 / 0.5 / 1 / 2.5 / 5/10/25 / 50A / SHORT
with moving coil-shaped 1.0 grade mirror true effective value conversion method |
| The withstand voltage secondary current switching |
Transformer / charge / reactor / OFF
5/10 / 25A (1 primary current) |
| Voltage output |
AC30 / 150/300/500 / 1000V (40VA) |
| voltmeter |
AC30 / 150/300/500 / 1000V
effective value in terms of method of moving coil-shaped 1.0 primary mirror with average measurement
30V range only Class 1.5 |
| resistance |
0 / 0.5 / 1/2/4/10/15/20/100/200 / 400Ω |
| External dimensions |
270 (D) × 370 (W) × 210 (H) (the power supply unit, measuring unit for both) |
| weight |
11kg |
| accessories |
Test code set (with storage bag) manual 1 each case cover |
Specifications (power supply unit)
| Use power |
AC100V ± 10V 50 / 60Hz |
| Maximum rating |
AC15A 30-minute rating (at the time of the breakdown voltage test output)
AC50A 30 seconds rated (overcurrent and land絡継when electronics output) |
| Output voltage |
AC0 ~ 130V |
| counter |
0 ~ 199.999sec resolution 1Ms
200 ～ 1999.99Sec resolution 10Ms
(with automatic carry function) |
| Counter accuracy |
0.01 Pasento rdg ± ± ± 1Dgt 5Ms ± ⊿T
⊿T: each error of the stop signal
contacts, DC voltage 1Ms ±
AC voltage (5 ～ 10V) ± 5Ms
AC voltage (10 ～ 20V) ± 2.5Ms
AC voltage (more than 20V) ± 1ms
self-power ± 3ms
case of ※ stop due to self-supply, depends on the supply load state of the power supply (back electromotive force due to the rotation device, etc., the residual voltage of the capacitor, etc.). The above accuracy, power supply of the counter is the accuracy of to completely cut off. |
| Stop signal |
Contact: a contact, b contact automatic detection
voltage: direct current, alternating current with 10 ~ 220V applied, remove
the self-power: there is no power at the same time tester and the display time for about 5 minutes (the relay is operated, it is that the counter is stopped. )
* count start from 600 seconds (10 minutes from the start) at the time that elapsed, the operation buzzer, the operation lamp will operate for 10 seconds.(Timer function for pressure test)
* with automatic reset function |
| Auxiliary power |
AC100V (10A) · DC110 / 48 / 24V (30W) |
| Overcurrent cutoff |
Test state release at about 16.5A during the pressure test |
| weight |
13kg |
|