Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị kiểm tra relay BCT-25K Soukou

Mã sản phẩm: BCT-25K
Sử dụng cho Model:
Hãng SX: Soukou
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Feature


■ In one set, OCR, GR, DGR (simple direction), VR, a possible pressure test by the connection of possible exchange-voltage transformer or the like colorful test OVGR, primary current, transformer current, charging current, the measurement of the reactor current is also current you can by switching the total. 
■ overcurrent relay test, at the time of easy to quickly test possible operating time measurement, current settling is no need of holding such as induction disk relay (operating lock switch) 
settling switch for ■ GR test comes with 
■ constant current output (auto mode)

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Specification (measuring section)


Ammeter range Adjustable Output: AC0.1 / 0.25 / 0.5 / 1 / 2.5 / 5/10/25 / 50A 
constant current output: AC3 / 3.5 / 4 / 4.5 / 5A relay tap for 150/200/300/400/500/700 / 1000% of current output
Total distortion factor Variable output: the same as the input power supply 
constant current output: within 10%
Output stability Variable output: the same as the input power supply 
constant current output: within ± 1% of each range
Voltmeter range AC30 / 150/300/500 / 1000V
Indicating instrument Ammeter: AC0.1 / 0.25 / 0.5 / 1 / 2.5 / 5/10/25 / 50A 
moving coil-shaped, 1.0 grade with mirror 
(True RMS conversion method) 
voltmeter: AC30 / 150/300/500 / 1000V 
moving coil-shaped, 1.0 grade with mirror 
(effective value in terms of method of average value measurement) 
30V range only class 1.5
External dimensions 270 (D) × 440 (W) × 210 (H)
weight 13kg
accessories Test code set (with storage bag) owner manual case cover each one



Specifications (power supply unit)


Use power AC100V ± 10V 50 / 60Hz
Maximum rating AC15A 30-minute rating (at the time of the breakdown voltage test output)
AC50A 30 seconds rated (overcurrent and land 絡継 when electronics output)
Output voltage AC0 ~ 130V
counter 0 ~ 199.999sec resolution 1Ms 
200 ~ 1999.99Sec resolution 10Ms 
(with automatic carry function)
Counter accuracy 0.01 Pasento rdg ± ± ± 1Dgt 5Ms ± ⊿T 
⊿T: each error of the stop signal 
contacts, DC voltage 1Ms ± 
AC voltage (5 ~ 10V) ± 5Ms 
AC voltage (10 ~ 20V) ± 2.5Ms 
AC voltage (more than 20V) ± 1ms 
self-power ± 3ms 
case of ※ stop due to self-supply, depends on the supply load state of the power supply (back electromotive force due to the rotation device, etc., the residual voltage of the capacitor, etc.). The above accuracy, power supply of the counter is the accuracy of to completely cut off.
Stop signal Contact: a contact, b contact automatic detection 
voltage: direct current, alternating current with 10 ~ 220V applied, remove 
the self-power: the display time for about 5 minutes 
there is no power at the same time tester (the relay is operated, it is that the counter is stopped. ) 
* count start from 600 seconds (10 minutes from the start) at the time that elapsed, the operation buzzer, the operation lamp will operate for 10 seconds.(Timer function for pressure test) 
* with automatic reset function
Auxiliary power AC100V (outputs the input power) 10A
Overcurrent cutoff Test circuit released by the pressure test, etc. about 16.5A
External dimensions 270 (D) × 350 (W) × 210 (H)
weight 11kg

Bình luận