■Current output: 4~20mA
■High accuracy (0.2%R.C. or 0.3%R.C.)
■High reliability and durability with no welded seams.
| Measured medium |
Water, oil, gases or other media that will not corrode SUS. |
| Pressure type |
Positive pressure can be measured. |
| Measured Range |
Rated capacity: 2000, 3000, 5000bar |
| Output type |
4~20mA(4 wire system) |
Specification(Mechanical input characteristics)
| Pressure type |
Absolute pressure |
| Accuracy Class |
0.3%R.C. |
| Initial Value |
0bar |
| Operating Range at Reference Temperature |
0 ~ Approx. 105% |
| Overload Limit at Reference Temperature |
150% |
| Test Pressure |
200% (5000bar: 150%) |
| During Dynamic Loading |
Permissible Pressure |
100% |
Permissible Vibration Amplitude
(As per DIN50, 100) |
70% |
| Dead Volume |
0.8cm³ |
| Control Volume |
1.5mm³ |
| Materials of Measurement Media's Contact Part |
1.4542(Measurement body) 1.4301(Seal) |
- * This is a made-to-order model. Contact our sales office for details.
Specification(Output characteristics)
| Transducer Identification |
TEDS (*1) |
| Signal Span(Sensitivity) |
4~20(16)mA |
| Sensitivity Tolerance of Zero Signal (Factory) |
2000, 3000bar: <±0.016mA
5000bar: ±0.032mA |
| Sensitivity Tolerance |
2000, 3000bar: <±0.016mA
5000bar: ±0.032mA |
| Maximum Signal |
21.6mA |
| Temperature Effect on Zero Balance (*2) |
0.2%/10k |
| Temperature Effect on Load (*2) |
0.2%/10k |
| (Start Setting)Characteristic Curve Deviation |
0.3% |
| Repeatability (As per DIN1319) |
<±0.05% |
| Cut-off Frequency of Output Signal |
-3dB |
4.5kHz |
| -1dB |
2kHz |
| Burden (Minimum) |
500Ω |
|