General
|
Pressure range |
Gauge mode: 1.4 kPa to 7 MPa (0.2 to 1000 psi) gauge
Absolute mode: 1.4 kPa to 7 MPa (0.2 to 1000 psi)
Vacuum mode: -100 to 0 kPa (-14.5 to 0 psi) gauge (Vacuum pressure achieved depends on local barometric pressure) |
Electrical power |
115/230 VAC, 50/60 Hz, 15 W |
Temperature |
Operating temperature 15 to 28°C (60 to 82°F)
Storage temperature -20 to 70°C (-4 to 158°F) |
Humidity |
Operating humidity 20–75% relative humidity, noncondensing; storage humidity 0–90% |
Pressure medium |
High purity nitrogen or dry, clean air with less than 0.5 ppm hydrocarbon and less than 5 ppm H2O content, dew point less than or equal to -50 °C, and less than 50 micron particulate size. Although lower quality gas can be used, the frequency of piston/cylinder cleaning will increase. |
Performance
|
Precision (type A uncertainty) |
Better than 3 ppm
Values are reported at the 95% confidence level (2σ) |
Long-term stability |
Better than 1.5 ppm per two years
Values are reported at the 95% confidence level (2σ) |
Resolutionc |
1 ppm or 1 mg |
Piston/Cylinder Assemblies
|
Low Range |
Nominal area: 0.52 in2 (3.4 cm2)
Pressure range: 0.2–25 psi (14 mbar to 1.7 bar)
Total uncertainty: 0.001% RDG or 0.00001 psi (threshold pressure 1 psi)c
Materials: Piston is 440C stainless steel, cylinder is cemented tungsten carbide
Thermal coefficient: 1.5E-05/°C |
Lower Mid Range |
Nominal area: 0.13 in2 (0.84 cm2)
Pressure range: 1.7–100 psi (117 mbar to 7 bar)
Total uncertainty: 0.001% RDG or 0.00004 psi (threshold pressure 4 psi)c
Materials: Piston and cylinder are cemented tungsten carbide
Thermal coefficient: 9.1E-06/°C |
Upper Mid Range |
Nominal area: 0.026 in2 (0.168 cm2)
Pressure range: 2–500 psi (0.14 to 35 bar)
Total uncertainty: 0.0026% RDG or 0.0004 psi (threshold pressure 16 psi)c
Materials: Piston and cylinder are cemented tungsten carbide
Thermal coefficient: 9.1E-06/°C |
High Range |
Nominal area: 0.013 in2 (0.084 cm2)
Pressure range: 2–1000 psi (0.14 to 70 bar)
Total uncertainty: 0.0026% RDG or 0.0004 psi (threshold pressure 16 psi)c
Materials: Piston and cylinder are cemented tungsten carbide
Thermal coefficient: 9.1E-06/°C |
|