General Specifications
|
| Power Requirements |
100 V ac to 240 V ac (-15 %, +10 %), 50 Hz to 60 Hz |
| Maximum Power Consumption |
Controller: 110 VA
Intensifier: 250 VA
|
| Operating Temperature Range |
0 °C to 50 °C |
| Storage Temperature Range |
-30 °C to 71 °C |
| Humidity |
5 % to 95 % |
| Vibration |
Meets MIL-T-28800D |
| Altitude (operation) |
2,000 m |
| Weight |
Controller: 12 kg (27 lb)
Intensifier: 14 kg (31 lb)
Accessory Kit with Handheld Control: 12 kg (27 lb)
Nitrogen Cylinder: 12 kg (26 lb)
|
| Dimensions |
Controller, Intensifier, and Accessory Kit: 32.5 cm Height x 30.5 cm Width x 30.5 cm Depth (13 in Height x 12 in Width x 12 in Depth)
Nitrogen Cylinder: 68.5 cm Height x 17.8 cm Diameter (27 in Height x 7 in Diameter) |
| Remote Communications Interfaces |
RS-232, USB type B, IEEE-488.2, USB type A (PRINTER port only) |
| Pressure Range |
3.5 kPa (0.5 psi) absolute to 70 MPa (10,000 psi) |
| Operating Medium |
Dry nitrogen supply, or ambient air compressed by on-board pump |
| Warm-up Time |
15 minutes from power on, after at least 60 minutes ambient temperature acclimation time within the working temperature range |