General
|
| Standard Pressure Ranges (FS, bara) |
6000, 10,000 psia (415, 700 bara) |
| Tare Mode |
Tare mode included for gauge calibrations |
| Display |
TFT, VGA, active matrix, 6.4 in (162.5 mm) 640 x 480 resolution, 65,000 colors |
| Electrical Power |
110 or 220 VAC (±18%), 50/60 Hz, single phase |
| Operating Temperature |
41°F to 122°F (5°C to 50°C) |
| Storage Temperature |
-4°F to 158°F (-20°C to 70°C) |
| Humidity |
5 to 95% relative humidity, non-condensing |
| Dimensions (h x w x d) |
17 in x 19 in x 24 in (43 cm x 49 cm x 61 cm) |
| Weight |
120 lb (54.5 kg) |
Performance
|
| Precision |
0.01% of range; to 10,000 psi (700 bar) |
| Stability |
0.01% of range, per year |
| Control Stability |
0.007% maximum FS for load volume 3 to 35 in3 (7.5 to 89 cm3); control low limit is 10% of maximum FS pressure |
| Warm Up Time |
30 minutes, may be left on indefinitely |
| Pressure Medium |
Dry, clean air or nitrogen |
| Supply Pressure |
10% above FS pressure range (may require optional external gas booster system), 100 to 110 psi (7 to 7.5 bar) industrial grade (shop) air for controller operation |
Pneumatics
|
| Pneumatics Ports |
Test port: 1/8 in NPT
Supply pressure port: 1/8 in NPT
Air supply: 1/4 in NPT |
| Overpressure Protection |
Test port relief valve set at 110% FS
Gas supply port set at 120% FS
Software limits (set by user) |
|