- The PCS-202SB and PCS-200ESB are non-contact capacitive proximity sensors that measure relative vibration and relative displacement. They use passive components allowing them to operate at high temperature levels. The raw signal picked up by these sensors is sent to a conditioner to be converted into a linearized 4 to 20 mA signal.
Sensors
- Operation
+ Measurement Type : Non-Contact Proximity, Capacitive Technology
- Connection
+ Integral Cable : Triaxial
+ Absolute Minimum Length : Nominal Minus 0.5 m [19.7 in]
+ Connector : Male, Gold-Plated SMA and Ground Terminal
- Environment
+ Temperature Range
Operating : 0 to 125°C [32 to 257°F]
+ Dust and Oil Contamination : Films Have No Effect
+ Humidity : Up to 95%, Non-Condensing
- Physical Characteristics
+ Sensor Material : Stainless Steel 303
+ Integral Cable Material : FEP Jacket / Teflon® Insulation
Armor Material : Flexible Stainless Steel Metallic Conduit
LIN™-300 Conditioner
- Power Requirements
+ Voltage : 24 Vdc ±15%
+ Consumption : 100 mA max.
+ Protection : Auto-Reset Fuse
+ Warm-Up Time : 30 Minutes
- Connection
+ Power / Output : 5-Pin M12 Male
+ Sensor Input : Female, Gold-Plated SMA and Grounding Terminal
- Environment
+ Temperature Range
Operating : 0 to 55°C [32 to 131°F]
Storage (Measuring Chain) : -25 to 70°C [-13 to 158°F]
- Physical Characteristics
+ Body : Nickel-Plated Aluminum
+ Mounting : 4 Slots for #6 (M3.5) Screws
+ Max. Torque on SMA : 1.1 Nm [10 in-lb]
+ Status Indicator : Bi-Color LED