- The FOA-100E is a single-axis, fiber optic accelerometer designed to measure vibration amplitudes of high voltage components that are subjected to electrodynamic and mechanical stress, such as stator end-windings. This sensor is suited for operation in hostile environments containing high voltage levels and severe electrical and magnetic interference.
- Operation
+ Sensitivity : 100 mV/g ±5%
+ Measuring Range : 0 to 40 g Peak
+ Bandwidth : 10 to 1000 Hz (-3 dB)
+ Voltage Output : 6 Vdc ±5% Bias, ±4 Vac
+ Sensitivity Deviation vs Temperature
Class A : ±10% max. @ 105°C [221°F]
Class F : ±10% max. @ 155°C [311°F]
+ Maximum Shock Acceleration : 1000g Half Sine 1 ms Duration
+ Resonance Frequency : ˃ 2 kHz
+ Transverse Sensitivity : < 5% Respecting Sensitive Axis
+ Residual Noise : < 6 mV RMS
- Power Requirements
+ Voltage : 24 Vdc ±20%
+ Consumption : 40 mA max.
- Connection
+ Connector Type : 4-Pin M12 Male
+ Maximum Cable Length : 350 m [1150 ft]
- Environmental
+ Temperature Range
Operating
Sensor Head (Class A) : -40 to 105°C [-40 to 221°F]
Sensor Head (Class F) : -40 to 155°C [-40 to 311°F]
Conditioner : 0 to 70°C [32 to 158°F]
Non-Destructive
Sensor Head : -50 to 200°C [-58 to 392°F]
Storage : -20 to 85°C [-4 to 185°F]
+ Humidity : Up to 95% Non-Condensing
+ Electrical Insulation (25oC [77oF] & 25% Humidity) : Up to 3 kV/mm ; Head vs Conditioner
+ Electrical & Magnetic Field : No Effect (Head Only
- Physical Characteristics
+ Sensor Head : Non-Conductive Materials
+ Integral Cable : Fiber Optics / PTFE Jacket
Length : 10 m [33 ft]
Minimum Bending Radius : 80 mm [3.15 in]
+ Conditioner Body : Chrome-Plated Brass Alloy