- The PES-110 eddy current proximity sensor is designed for non-contact measurements of relative vibration, displacement, and axial positioning. The sensor is equipped with built-in conditioning circuitry allowing it to be directly connected to processing instrumentation.
- Operation
+ Measurement Type : Non-contact proximity, eddy current
+ Measuring Range : 0 to 10 mm [0 to 394 mils]
+ Outputs : 4 to 20 mA; 0 to 10 V
+ Sensitivity : 1.6 mA/mm [40.6 μA/mil]; 1 V/mm [25.4 mV/mil]
+ Accuracy : According to correction factor
+ Repeatability : ± 5%
+ Bandwidth : DC to 500 Hz (-3dB)
+ Load at Current Output : 500 Ω max.
+ Load at Voltage Output : 10 kΩ min.
+ Temperature Drift : < 10%
+ Short Circuit Protection : Built-in
- Power Requirements
+ Voltage : 15 to 30 Vdc
+ Consumption : 30 mA max.
+ Voltage Reversal Protection : Built-in
+ Warm-up Time : 5 minutes
- Connection
+ Connector Type : 4-pin M12 male
+ Maximum Cable Length
For Current Output : 300 m [984 ft]
For Voltage Output : 100 m [328 ft]
- Environment
+ Temperature Range
Operating : 0 to 70 °C [32 to 158 °F]
Storage : -25 to 70 °C [-13 to 158 °F]
+ Protection Rating : IP67
- Physical Characteristics
+ Sensor Body : Chrome-plated brass
+ Sensing Face : PBTP