Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Capacitive Stator Bar Vibration Measuring Chains DCS-400/SBV-202P Vibrosystm

Mã sản phẩm: DCS-400/SBV-202P
Sử dụng cho Model:
Hãng SX: Vibrosystm
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Capacitive Stator Bar Vibration Measuring Chains
Model: DCS-400/SBV-202P
Hãng: Vibrosystm

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

- The DCS-400 and SBV-202P are non-contact capacitive sensors that are embedded in a stator slot or wedge, facing the stator bars, to measure in-slot stator winding vibration. Apart from having two completely distinct installation procedures, these sensors both transfer their raw signal to a conditioner to be converted into a linearized 4 to 20 mA signal.

Sensors
- Operation
   + Measurement Type :  Non-Contact Proximity, Capacitive Technology
- Connection
   + Integral Cable
     DCS-400 :  Coaxial
     SBV-202P :  Triaxial
   + Integral Cable Connector
     DCS-400 :  Male, Nickel-Plated SMA
     SBV-202P :  Male, Gold-Plated SMA and Ground Terminal
- Environment
   + Temperature Range Operating :  0 to 125°C [32 to 257°F]
   + Magnetic Field Immunity : Up to 2 Tesla (50 or 60 Hz)
   + Dust and Oil Contamination : Films Have No Effect
   + Humidity :  Up to 95%, Non-Condensing
- Physical Characteristics
   + Sensor Material :  Non-Conductive and SemiConductive Material
   + Integral Cable Material :  FEP Jacket / Teflon Insulation

Extension Cable
- Connection
   + Cable Type Triaxial
   + Absolute Minimum Length Nominal Minus 0.5 m [19.7 in]
   + Connector
     Sensor Side :  Female, Gold-Plated SMA and Ground Terminal
     Conditioner Side :  Male, Gold-Plated SMA and Ground Terminal
   + Minimum Bending Radius 10 cm [4 in]
- Environment
   + Temperature Range :  0 to 75°C [32 to 167°F]
- Physical Characteristics
   + Cable Material :  PVC Jacket / PE Insulation

LIN™-300 Conditioner
- Power Requirements
   + Voltage :  24 Vdc ±15%
   + Consumption : 100 mA max.
   + Protection : Auto-Reset Fuse
   + Warm-Up Time : 30 Minutes 
- Connection
   + Power / Output : 5-Pin M12 Male
   + Sensor Input : Female, Gold-Plated SMA and Grounding Termina
- Environment
   + Temperature Range
     Operating : 0 to 55°C [32 to 131°F]
     Storage (Measuring Chain) : -25 to 70°C [-13 to 158°F]
- Physical Characteristics
   + Body : Nickel-Plated Aluminum
   + Mounting : 4 Slots for #6 (M3.5) Screws
   + Max. Torque on SMA : 1.1 Nm [10 in-lb]
   + Status Indicator : Bi-Color LED

Bình luận