Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Digital counter SPS KPS / KPS-P NPS CNT-3921 - Mutoh

Mã sản phẩm: SPS KPS / KPS-P NPS CNT-392
Sử dụng cho Model:
Hãng SX: Mutoh
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Digital counter  SPS  KPS / KPS-P  NPS  CNT-3921  - Mutoh

Liên Hệ Hỗ Trợ

SĐT: 0984 843 683

    • Mail: info@ttech.vn

      Zalo: 0984.843.683


Thông tin sản phẩm

Digital counter  SPS  KPS / KPS-P  NPS  CNT-3921  - Mutoh 

Digital counter main specifications of the
Model name Digital counter Analog output corresponding 
small counter
SPS KPS KPS-P CNT-3921
NSS-A
Number of display digits 6-digit (- including the display) 
red 7-segment LED 
character height 10mm
± 7 digits / red 7 segment LED / character height 15 mm 6-digit / 7-segment LED 
red, green selectable 
character height 14.2mm
Count value reset Reset by manual switch and external control signal Reset by external control
Count range Length measurement + 999999~ -99,999 
angle ± 360.00 °
Measuring ± 9999999 angle ± 360.00.00 ° 
measurement: 10-binary
Measuring Tasu999999 
~ -199 999
Count mode Angle 1 · 5 · 10 min · 0.01 · 0.1 / 1 ° reading Angle 1 · 10 · 15 · 30 sec · 1 · 5 · 10 min · 0.01 · 0.1 / 1 ° reading Length measuring decimal
Others: Tachometer / Speedometer
Decimal point position Optional setting by parameter setting
Lead value Optional setting by parameter setting
memory Backed up by the non-volatile memory 
(about 10 years from when the power is OFF)
By an internal battery 
for a month hold
Key switch Clear · digit · UP
Preset · digit · UP · DOWN
-
Power supply voltage / power consumption AC 100 to 240 V ± 10% 50/60 Hz 5 W AC100 / 115/200 / 230V DC9.6~30V 8VA following 
orders at the time specified
Encoder power supply DC 12 V 100 mA
150MA DC12V / 
DC5V 100MA (optional)
· 100MA DC5V / 
DC12V · 50MA 
is specified orders
Response frequency 5KHz / 50KHz / 500KHz 
(parameter settings)
250 kHz
Rotation number indication Rpm number of encoder shaft rotation displayed
Display speed Speed display mm / minute by the rotary encoder or a linear encoder 
peak hold: Display the maximum value of the count value 
Bottom hold: count value display the minimum value of the 
amplitude display: The maximum value of the count value - Displays the minimum value
External control signal Reset, preset Reset · Inhibit · Preset · Multiplier operation · Millimeter / scale display switching · Milli / inch display switching
Parallel output - - 28bit / SIGN / strobe -
Parallel output 
update time
- - About 1 ms -
Operating temperature 0 to 45 ° C
Operating humidity range RH 35% to 90% (no condensation) -
Storage temperature -20 to 80 ° C
Mass About 200G 
(including mounting bracket)
About 270G 
(including mounting bracket)
Approximately 700 g
Anti-vibration 49M / S 2 in 30 minutes -
Impact resistance Durable 294M / S 2 X · Y · Z each direction 3 times -
Output point - 2 points output
Output Capacity - Photo MOS relay 
MAX DC350V 80MA 
MAX AC240V 80MA 
(resistive load)
Output signal timing - 40 ms or more after latch hold signal input 2 level output
Analog output - 0~10V / ± 10V / 
1 to 5 V / 4 to 20 mA 
(specify when ordering)
Output update time - About 1Ms 
(maximum delay time 3ms pulse input - analog output)
Output rate - 0 Offset and full scale value can be set internally
resolution - Approximately 10000 times (0 to 10 V)
Load resistance - When the voltage output 
. 7Keiomega or more 
when the current output 
560Ω or less
Output accuracy - Within ± 0.2% FS (23 ° C)
Humidity coefficient - Within ± 200 ppm / ° C
option - EX-2 or TC-1 CK-4-2 -
RoHS Directive Correspondence -


Bình luận