Gas Sensors Slots |
up to 7; see Sensor list |
Additional Sensor |
RAEMet (Wind Speed, Wind Direction, Temperature & Humidity) |
GPS |
Standard equipment in every unit |
Battery |
Rechargeable 7.2 V / 10 Ah Li-ion battery pack with built-in charger |
Operating Hours |
~16 hours with wireless connectivity on Li-ion battery pack |
Power Input |
12VDC >2A |
Display |
Large 240 x 320 pixel LCD backlit display |
|
64 x 85 mm / 2.5” x 3.33” |
Keypads |
3 operation and programming keys |
Alarms |
Multi-tone 108dB buzzer @ 3.3 ft / 1 m, Bright LED 360 degree view and on-screen indication of alarm conditions |
|
Additional diagnostic alarm and display message for low battery |
|
Wireless connectivity alarm |
Data Logging |
Continuous data logging (90 days for 7 gas sensors, 1 Gamma sensor, 1 RAEMet (wind speed & direction, temp and RH), and GPS at 1 min intervals, 24/7) |
Data Storage |
24M bytes (memory full action: stop when full or Wrap around) |
Data Interval |
User-configurable from 1 to 3,600 sec |
Wireless |
Standard Bluetooth Low Energy module (BT4.0) and GPS |
|
Primary radio module: - Long range ISM License Free 900MHz or 2.4GHz radio - IEEE 802.11 b/g Wi-Fi |
|
Secondary radio module: Short range IEEE 802.15.4 900MHz or 868MHz Mesh Radio |
|
Wireless range3: Up to 2 miles (3 km) for ISM 900 MHz; Up to 1.2 miles (2 km) for ISM2.4GHz; Up to 330 ft (100m) for Wi-Fi; Up to 650 ft (200m) for Mesh secondary radio; Up to 15 ft (5m) for BLE. |
|
Wireless Approval: FCC Part 15, CE R&TTE, Others4 |
Communication |
Communicates to ProRAE Studio II via USB cable to PC; |
|
Wireless data and alarm status transmission via Wi-Fi or ISM modem; |
|
Act as gateway to connect up to 8 remote instruments (using secondary radio module) |
Safety Certification |
Class 1, Division 2 Groups A, B, C, D |
Sampling Pump |
Built-in pump, typical flow rate 450 cc/min |
Temperature |
-20 °C to +50 °C / (- 4 °F to +122 °F) |
Humidity |
0% to 95% relative humidity (non-condensing) |
Ingress Protection (IP) |
IP 65 |
Performance Tests |
MIL-STD-810G and 461F |
|
LEL CSA C2.2No. 152, ISA-12.13.01 |
RAEMet Specifications (Optional) |
Wind Speed |
Range: 0 to 20 m/s (0 to 44 mph) Start Speed: 0.1 m/s (0.22 mph) |
Wind Direction |
Range: 360° (No dead band) |
Temperature |
-20 °C to 60 °C (-4 °F to 140 °F) Resolution 0.1 °C (1.8 °F) |
Humidity |
10 to 95% RH Resolution 1% RH |
Compass |
Resolution 1° |
Power |
Power supplied by the AreaRAE Plus |
Supported Sensors |
PID Sensors |
|
7R+; 10.6 eV ppm |
Range |
0 to 2,000 ppm |
Resolution |
0.1 ppm |
|
4R+; 9.8 eV |
Range |
0 to 5,000 ppm |
Resolution |
0.1 ppm |
Combustible Sensor |
|
Catalytic Bead Sensor |
Range |
0 to 100% LEL |
Resolution |
1% LEL |
Electrochemical Sensors |
|
Ammonia (Nh3) |
Range |
0 to 100 ppm |
Resolution |
1 ppm |
|
Carbon Monoxide (CO) |
Range |
0 to 500 ppm |
Resolution |
1 ppm |
|
Carbon Monoxide Ext. (CO HR) |
Range |
0 to 2,000 ppm |
Resolution |
10 ppm |
|
Carbon Monoxide H2 Comp (CO H2 Comp) |
Range |
0 to 2,000 ppm |
Resolution |
10 ppm |
|
Chlorine (Cl2) |
Range |
0 to 50 ppm |
Resolution |
0.1 ppm |
|
Chlorine Dioxide (ClO2) |
Range |
0 to 1 ppm |
Resolution |
0.03 ppm |
|
Ethylene Oxide (ETO-A) |
Range |
0 to 100 ppm |
Resolution |
0.5 ppm |
|
Ethylene Oxide (ETO-B) |
Range |
0 to 10 ppm |
Resolution |
0.1 ppm |
|
Ethylene Oxide (ETO-C) |
Range |
0 to 500 ppm |
Resolution |
10 ppm |
|
Hydrogen (H2) |
Range |
0 to 2,000 ppm |
Resolution |
10 ppm |
|
Hydrogen Chloride (HCl) |
Range |
0 to 30 ppm |
Resolution |
1 ppm |
|
Hydrogen Cyanide (HCN) |
Range |
0 to 50 ppm |
Resolution |
0.5 ppm |
|
Hydrogen Fluoride (HF) |
Range |
0.5 to 10 ppm |
Resolution |
0.1 ppm |
|
Hydrogen Sulphide (H2S) |
Range |
0 to 100 ppm |
Resolution |
0.1 ppm |
|
Hydrogen Sulphide Ext. (H2S HR) |
Range |
0 to 1,000 ppm |
Resolution |
1 ppm |
|
Oxygen (O2) |
Range |
0 to 30 % |
Resolution |
0.10 % |
|
Sulphur Dioxide (SO2) |
Range |
0 to 20 ppm |