Sensor |
Over 20 intelligent interchangeable field-replaceable electrochemical sensors |
Battery |
Rechargeable Li-ion battery - Operating time: > 30 hours (normal operation, non-wireless) - Recharge time: < 4 hours through charging cradle |
Display |
Graphical LCD display with white LED backlighting (activated when monitor is in alarm or with a button press) |
Display Readout |
- Real-time reading of gas concentrations in parts per million (ppm) or mg/m3 ;battery status; data logging on/off; wireless on/off and reception quality - STEL, TWA, and peak values |
Keypad |
2 buttons for operation and programming |
Sampling |
Diffusion |
Calibration |
Automatic with AutoRAE 2 Test and Calibration System or manual |
Alarm Modes |
- Wireless remote alarm notification; audible (95 dB @ 30 cm), vibration, visible alarm (flashing bright red LEDs), and on-screen indication of alarm conditions. - Man Down Alarm with pre-alarm and real-time remote wireless notification |
Datalogging |
- Continuous datalogging with a three-month capacity (at one-minute intervals) - User-configurable datalogging interval (from 1 to 3,600 seconds) |
Communication and Data Download |
- Data download and instrument set-up on PC via charging and PC comm. cradle - Data download via AutoRAE 2 Automatic Test and Calibration System - Wireless data and status transmission via built-in RF modem (optional) |
Wireless Network |
ProRAE Guardian Real-Time Wireless Safety System or Closed-Loop Network with the EchoView Host |
Wireless Range (Typical) |
ToxiRAE Pro to Mesh Router, EchoView Host, or Mesh Reader2 ~ 660 feet (200 meters) ToxiRAE Pro to RAELink3 Mesh or RAELink3 Z1 Mesh modems ~ 330 feet (100 meters) |
Operating Temperature |
-4° to 131°F (-20° to 55°C) |
Humidity |
0% to 95% relative humidity (non-condensing) |
Dust and Water Resistance |
IP-65 rating for dust and water ingress protection (validated by an independent test laboratory) |
Safety Certifications |
CSA: Class I, Division 1, Groups A, B, C and D. T-code T4 Class I, Zone 0 A/Exia IIC T4 ATEX: , II 1G, Ex ia IIC Ga T4 IECEx: Ex ia IIC Ga T4 China Ex: Ex ia IIC T4 |
EMC/RFI |
EMC directive: 2004/108/EC |
Warranty |
- Two years on non-consumable components and CO, H2S, and O2 sensors - One year on all other sensors, battery, and other consumable parts |
Wireless Frequency |
ISM license-free band. IEEE 802.15.4 Sub 1GHz |
Wireless Approvals |
FCC Part 15, CE R&TTE, Others |
Radio Module |
Supports RM900 |
Sensor Specifications |
|
Ammonia (NH3) |
Range |
0 to 100 ppm |
Resolution |
1 ppm |
|
Carbon Monoxide (CO) |
Range |
0 to 500 ppm |
Resolution |
1 ppm |
|
Carbon Monoxide (CO), Ext. Range |
Range |
0 to 2,000 ppm |
Resolution |
10 ppm |
|
Carbon Monoxide (CO), H2-comp |
Range |
0 to 2,000 ppm |
Resolution |
10 ppm |
|
Chlorine (Cl2) |
Range |
0 to 50 ppm |
Resolution |
0.1 ppm |
|
Chlorine Dioxide (ClO2) |
Range |
0 to 1 ppm |
Resolution |
0.03 ppm |
|
Ethylene Oxide (EtO-A) |
Range |
0 to 100 ppm |
Resolution |
1 ppm |
|
Ethylene Oxide (EtO-B) |
Range |
0 to 10 ppm |
Resolution |
0.1 ppm |
|
Ethylene Oxide (EtO-C), Ext. Range |
Range |
0 to 500 ppm |
Resolution |
10 ppm |
|
Formaldehyde (HCHO) |
Range |
0 to 10 ppm |
Resolution |
0.05 ppm |
|
Hydrogen (H2) |
Range |
0 to 1,000 ppm |
Resolution |
10ppmv |
|
Hydrogen Cyanide (HCN) |
Range |
0 to 50 ppm |
Resolution |
0.5 ppm |
|
Hydrogen Sulfide (H2S) |
Range |
0 to 100 ppm |
Resolution |
0.1 ppm |
|
Hydrogen Sulfide (H2S), Ext. Range |
Range |
0 to 1,000 ppm |
Resolution |
1 ppm |
|
Methyl Mercaptan (CH3-SH) |
Range |
0 to 10 ppm |
Resolution |
0.1 ppm |
|
Nitric Oxide (NO) |
Range |
0 to 250 ppm |
Resolution |
0.5 ppm |
|
Nitrogen Dioxide (NO2) |
Range |
0 to 20 ppm |
Resolution |
0.1 ppm |
|
Oxygen (O2) |
Range |
0 to 30% Vol. |
Resolution |
0.1% Vol. |
|
Phosphine (PH3) |
Range |
0 to 20 ppm |
Resolution |
0.1 ppm |
|
Sulfur Dioxide (SO2) |
Range |
0 to 20 ppm |
Resolution |
0.1 ppm |