Sensors |
25 intelligent interchangeable field-replaceable sensors including PID for VOCs, electrochemical sensors for toxic gases and oxygen,combustible LEL and NDIR sensors, and CO2 NDIR sensor |
Battery Options, Runtime5 and Recharge Time |
- Rechargeable Li-ion (~12-hr. runtime, < 6-hr. recharge time) - Extended duration Li-ion (~18-hr. runtime, < 9-hr. recharge time) - Alkaline adapter with 4 x AA batteries(~6-hr. runtime) |
Display |
Monochrome graphical LCDdisplay(128 x 160)with backlighting.Automaticscreen “flip”feature |
Display Readout |
- Real-time reading of gas concentrations; PID measurement gas and correction factor; Man Down Alarm on/off;visual compliance indicator; batterystatus; datalogging on/off; wireless on/off and reception quality. - STEL, TWA, peak, and minimum values |
Keypad Buttons |
3 operation and programming keys(Mode, Y/+, and N/-) |
Sampling |
Built-in pump. Average flow rate: 250 cc/min. Auto shutoff in low-flow conditions |
Calibration |
Automatic with AutoRAE 2 Test and Calibration System or manual |
Alarms |
- Wireless remote alarm notification; audible (95 dB @ 30 cm),vibration,visible (flashing bright red LEDs), and on-screen indication of alarm conditions - Man Down Alarm with pre-alarm and real-time remote wireless notification |
Datalogging |
Continuous datalogging (6 months for 5 sensors at 1-minute intervals, 24/7) - User-configurable datalogging intervals(from 1 to 3,600 seconds) |
Communication and Data Download |
- Data download and instrument set-up and upgrades on PC via desktop charging and PC comm.cradle, travel charger, or AutoRAE 2 Automatic Test and Calibration System - Wireless data and alarm status transmission via built-in RF modem (optional) |
Wireless Network |
ProRAE Guardian Real-Time Wireless Safety System or EchoView Host-based Closed-Loop System |
Wireless Range (Typical) |
MultiRAE to RAELink3 [Z1] Mesh modem ~330 feet (100 meters) MultiRAE to EchoView Host, RAEMesh Reader or RAEPoint ~660 feet (200 meters) |
Operating Temperature |
-4°to 122°F(-20°to 50°C) |
Humidity |
0% to 95% relative humidity(non-condensing) |
Dust and Water Resistance |
IP-65 ingress protection rating (dust-tight and waterproof against hosing jets coming from all directions) |
Safety Certifications |
CSA: ClassI, Division 1, Groups A, B, C and D, T4 ClassII, Division 1; Groups E,F, G; T85°C ATEX: 0575 II 1G Exia IIC T4 Ga 2G Exia d IIC T4 Gb with IR Sensor installed I M1 Exia I Ma IECEx: Exia IIC T4 Ga Exia d IIC T4 Gb with IR Sensor install |
EMC/RFI |
EMC directive: 2004/108/EC EMI and ESD test: 100MHz to 1GHz 30V/m, no alarm Contact: ±4kV Air: ±8kV, no alarm |
Performance Tests |
MIL-STD-810G and 461Fcompliant.LEL CSA C22.2 No. 152; ISA-12.13.01 |
Languages |
Arabic, Chinese, Czech, Danish, Dutch, English,French, German, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish, and Turkish |
Warranty |
- Two years on non-consumable components and catalyticLEL, CO, H2S, and O2 sensors - One year on all othersensors, pump, battery, and otherconsumable parts |
Wireless Frequency |
ISM license free band. IEEE 802.15.4 Sub 1GHz |
Wireless Approvals |
FCC Part 15, CE R&TTE, Others |
Radio Module |
Supports RM900A |
Sensor Specifications |
PID Sensors |
|
VOC 10.6 eV (Ext. Range) |
Range |
0 to 5,000 ppm |
Resolution |
0.1 ppm |
Combustible Sensors |
|
CatalyticLEL |
Range |
0 to 100% LEL |
Resolution |
1% LEL |
|
NDIR (0-100% LEL Methane) |
Range |
0 to 100% LEL |
Resolution |
1% LEL |
|
NDIR (0-100% Vol. Methane) |
Range |
0 to 100% Vol. |
Resolution |
0.1% Vol. |
Carbon Dioxide Sensor |
|
Carbon Dioxide (CO2) NDIR |
Range |
0 to 50,000 ppm |
Resolution |
100 ppm |
Electrochemical Sensors |
|
Ammonia (NH3) |
Range |
0 to 100 ppm |
Resolution |
1 ppm |
|
Carbon Monoxide (CO) |
Range |
0 to 500 ppm |
Resolution |
1 ppm |
|
Carbon Monoxide (CO), Ext. Range |
Range |
0 to 2,000 ppm |
Resolution |
10 ppm |
|
Carbon Monoxide (CO), H2-comp |
Range |
0 to 2,000 ppm |
Resolution |
10 ppm |
|
Carbon Monoxide (CO) + |
Range |
0 to 500 ppm |
Resolution |
1 ppm |
|
Hydrogen Sulfide (H2S) Combo |
Range |
0 to 200 ppm |
Resolution |
0.1 ppm |
|
Chlorine (Cl2) |
Range |
0 to 50 ppm |
Resolution |
0.1 ppm |
|
Chlorine Dioxide (ClO2) |
Range |
0 to 1 ppm |
Resolution |
0.03 ppm |
|
Ethylene Oxide (EtO-A) |
Range |
0 to 100 ppm |
Resolution |
0.5 ppm |
|
Ethylene Oxide (EtO-B) |
Range |
0 to 10 ppm |
Resolution |
0.1 ppm |
|
Formaldehyde (HCHO) |
Range |
0 to 10 ppm |
Resolution |
0.05 ppm |
|
Hydrogen Cyanide (HCN) |
Range |
0 to 50 ppm |
Resolution |
0.5 ppm |
|
Hydrogen Sulfide (H2S) |
Range |
0 to 100 ppm |
Resolution |
0.1 ppm |
|
Methyl Mercaptan (CH3-SH) |
Range |
0 to 10 ppm |
Resolution |
0.1 ppm |
|
Nitric Oxide (NO) |
Range |
0 to 250 ppm |
Resolution |
0.5 ppm |
|
Nitrogen Dioxide (NO2) |
Range |
0 to 20 ppm |
Resolution |
0.1 ppm |
|
Oxygen (O2) |
Range |
0 to 30% Vol. |
Resolution |
0.1% Vol. |
|
Phosphine (PH3) |
Range |
0 to 20 ppm |
Resolution |
0.1 ppm |
|
Sulfur Dioxide (SO2) |
Range |
0 to 20 ppm |
Resolution |
0.1 ppm |