Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Microwave test & sub-picosecond timing without high cost PicoScope 9200 Series PicoTech

Mã sản phẩm: PicoScope 9200 Series
Sử dụng cho Model:
Hãng SX: PicoTech
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
12 GHz (29 ps) bandwidth
200 kS/s sample rate to 4 kS store
200 fs, 5 THz effective sample rate
10 GHz prescaled & 1 GHz direct trigger
Pattern sync trigger of length 7 to 216–1
4 ps typical RMS jitter
16 bit ADC resolution

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Channels (vertical)
Channels 2 (simultaneous acquisition)
Bandwidth
Full
Narrow

DC to 12 GHz
DC to 8 GHz
Rise time (calculated)
Full bandwidth
Narrow bandwidth
10% to 90%, tR = 0.35/BW
29.2 ps
43.7 ps
Input connectors SMA (F)
ADC resolution 16 bits
Scale factors (sensitivity) 2 mV/div to 500 mV/div.
1-2-5 sequence and 0.5% fine increments
Nominal input impedance (50 ±1) Ω
Optical–electrical (O/E) converter (PicoScope 9221A and 9231A)
Unfiltered bandwidth DC to 8 GHz typical.
DC to 7 GHz guaranteed at full electrical bandwidth
Effective wavelength range 750 nm to 1650 nm
Calibrated wavelengths 850 nm (MM), 1310 nm (MM/SM), 1550 nm (SM)
Transition time 10% to 90% calculated from tR = 0.48 / BW: 60 ps max.
RMS noise, maximum 4 µW (1310 and 1550 nm), 6 µW (850 nm)
Scale factors (sensitivity) 1 µV/div to 400 µV/div (full scale is 8 divisions)
DC accuracy, typical ±25 µW ±10% of vertical scale
Maximum input peak power +7 dBm (1310 nm)
Fiber input Single-mode (SM) or multi-mode (MM)
Fiber input connector FC/PC
Input return loss
SM
MM

−24 dB, typical
−16 dB, typical; −14 dB, maximum
Timebase (horizontal)
Digitising rate DC to 200 kHz maximum
Timebases 10 ps/div to 50 ms/div (main, intensified, two delayed, or dual delayed)
Time interval resolution 200 fs minimum
Data record length 32 to 4096 points maximum per channel in x2 sequence
Delta time interval accuracy
For horizontal scale > 450 ps/div

For horizontal scale = 450 ps/div

±0.2% of Delta Time Interval ±15 ps at a temperature within ±3 °C of horizontal calibration temperature.
±15 ps or ±5% of Delta Time Interval ±5 ps, whichever is smaller at a temperature within ±3 °C of horizontal calibration temperature.
Acquisition modes Sample (normal), average, envelope
Dynamic performance (typical)
RMS noise, maximum
Full bandwidth
Narrow bandwidth
With averaging

2 mV
1.5 mV
100 µV system limit

Bình luận