Accuracy
|
| Accuracy* |
±0.015% of reading (±0.008% optional)
*Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
|
Mass and PCU Materials of Construction
|
| Standard weight material |
Series 3 non-magnetic austenitic stainless steel |
| Weight density |
7.8 g/cm³ |
| Optional fractional weights |
Solution heat treated aluminum |
| Weight density |
2.7 g/cm³ |
| Models P3011, P3012, P3013, P3022, P3023, P3025 (V) |
Piston Material: Ceramic
Cylinder Material: Martensitic steel
Coefficient of Expansion: 11 ppm/°C |
| Models P3014, P3015, P3025 (P) P3031, P3032 (P & V) |
Piston Material: Tungsten carbide
Cylinder Material: Martensitic steel
Coefficient of Expansion: 16.5 ppm/°C |
| Model P3016 |
Piston Material: Tungsten carbide
Cylinder Material: Tungsten carbide
Coefficient of Expansion: 11 ppm/°C |
General
|
| Test port adaptors |
1/8, 1/4, 3/8 and ½ NPT or BSP |
| Instrument weight |
24 lbs |
| Instrument size |
17.5 W x 12 D x 8.5 H |
| Mass set weight (typical) |
65 lbs |
Minimum Standard Weight Increments
|
| P3012, P3022 Pressure |
1 inH2O, (5 mbar) |
| P3013, P3023 Pressure |
2 inH2O, (10 mbar) |
| P3014, P3015, P3025 Pressure |
1 psi, (0.1bar) |
| P3016, P3031, P3032 |
1 psi, (0.1bar) |
| P3011, P3022, P3023, P3025 Vacuum |
0.2 inHg (10 mbar) |
Optional Fractional Weights
|
| P3014, P3015, P3025 Pressure |
0.1 psi (0.01 bar) |
Built-in Hand Pumps
|
| Pressure mode |
Max pressure 300 psi (20 bar) |
| Vacuum mode |
To 90% vacuum |
|