Feature:
The structure uses no catalyst.
A heat exchanger can be optionally installed.
Fresh air is added to the exhaust gas generated through ceramics temporary sintering or electronic part defatting in order to completely burn the exhaust gas. The contained binders and additive constituents can be burnt and exhausted.
Use in sets with an inert gas oven or a defatting oven is recommended.
The Moldatherm heater is used.
| GM series specifications |
| Method |
Electric resistance heating |
| Max. operation Temperature(*1) |
850°C |
| Normal operation Temperature(*1) |
90~850°C |
| TC |
K |
| Exhaust port |
Φ76.3 · steel tubes for piping |
| Control System |
Temperature Controller |
| Fail-safe |
Earth Leakage Breaker,
Over-heat Protection,
Circuit Breaker |
(*1) Temperature at the control point within the heating chamber.
☆ Thermocouples are consumable items. |
| Type |
GM-30C |
GM-40C |
GM-50C |
| Heater Power |
12.2kW(at 100V) |
18.4kW(at 200V) |
24.5kW(at 200V) |
| Air |
max.200L/min |
max.300L/min |
| Firing chamber dimension (mm) |
Φ318(ID)×485(L) |
Φ318(ID)×800(L) |
Φ318(ID)×1200(L) |
| Outer dimension (mm) |
800(W)
×
1700(H)
×
800(D) |
800(W)
×
2000(H)
×
800(D) |
800(W)
×
2315(H)
×
800(D) |
| Equipment weight |
200kg |
320kg |
420kg |
| Breaker capacity |
AC200V 75A
3ø 50/60Hz |
AC200V 100A
3ø 50/60Hz |