Feature:
Based on abundant experiences, the ovens achieve a maximum of 600°C as the equipment using non-oxidation atmospheres.
We have abundant experiences in supplying this series of ovens for production by glass substrate, defatting ceramics and other materials.
A chamber external cooling system using a cooling blower lowers the temperature from 600°C to 100°C in 150 min. (INH-21CD).
N2 purging achieves 20 ppm of residual O2 concentration.
The oil seal and silicone seal keep airtightness, and the water-cooling mechanism further protects the seals from heat.
| INH series specifications |
| Method |
Convection (Side-flow) |
| Max. operation Temperature(*1) |
600°C |
| Normal operation Temperature(*1) |
RT+60~600°C |
| Temperature distribution (Reference)(*2) |
±8°C(at 600°C), ±5°C(at 350°C) |
| Oxygen concentration (Reference) |
Less than 20ppm |
| Withstand load (Uniformly-distributed load) |
15kg/1 sheet |
| Chamber pressure meter |
0~2kPa |
| Thermocouple |
K |
| Control System |
Temperature Programmer |
| Cooling System |
Forced cooling |
| Safety feature |
Electric leak breaker,
Over-heat protection,
Motor over-load protection,
Control circuit breaker |
| Standard accessory |
Shelves (with shelf plates),
Temperature Recorder |
(*1) Temperature at the control point within the heating chamber.
(*2) Valid dimension is two-thirds inside dimension.
☆ Cooling water is necessary to protect seal packing.
☆ Thermocouples are consumable items. |
|