MAIN FEATURES
DC cable testing up to 80 kV;
Converting high-resistive cable faults into lowresistive with a use of burn generator;
Surge energy up to 2400 J;
Precise fault prelocating using Time‑Domain Reflectometer RIF‑9;
Cable route tracing with a use of 200 W lowfrequency generator and receiver;
Precise pinpointing using a surge wave generator with a ground microphone.
ADVANTAGES
Easy user friendly interface;
High safety level;
Multistep self fault protection;
Flexible auxiliary equipment integration.
| Parameter |
Value |
| GENERAL parameter |
| Input voltage, V |
230 ± 23 |
| Frequency, Hz |
50 ± 1 |
| Power consumption, kVA, max |
2.0 (3.5 for 40A burn generator) |
| TEST MODE |
| Output DC voltage range, kV |
0 – 80
|
| Output DC current range, mA |
0 – 580
|
| BURN MODE |
Output DC voltage range, kV
|
0 – 20
|
| Output DC current range, A |
0 – 40
|
| SURGE MODE |
| DC voltage ranges, kV |
4 / 8 / 16 / 32
|
| Output energy, J, max |
2560 (at each range) |
| Timer set (automatic surge mode), seconds |
3 – 15
|
| Manual single surge |
yes |
| Flexible voltage change during automatic operation |
yes |
Pinpointing with an acoustic receiver
|
yes |
| PRELOCATION MODE |
| Methods |
TDR / Arc reflection / Impulse current / Voltage coupling / Arc reflection + burn |
| Automatic distance measuring |
yes |
| Saving cable parameters into Reflectometer non‑volatile memory |
yes |
| Saving reflectograms either to Reflectometer non-volatile memory or USB flash drive |
yes |
| CABLE TRACING MODE |
| Cable tracing using 200W audio-frequency generator with frequencies 491/ 982/ 8440 Hz with a receiver |
yes |
|