Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Xe thử nghiệm cáp ngầm ETL-8V KEP

Mã sản phẩm: ETL-8V
Sử dụng cho Model:
Hãng SX: KEP
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
ETL-8V is a modular diagnostic and test equipment, which is designed for testing and fault location of both LV and MV cables. The key parameters are designed flexible to satisfy customer’s specific requirements.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

MAIN FEATURES 

  • DC cable testing up to 8 kV;
  • Cable faulty place burning;
  • Precise fault prelocating using Time‑Domain Reflectometer RIF‑9;
  • Precise pinpointing with ground microphone;
  • Cable route tracing (optional).

  • ADVANTAGES

  • Easy user friendly interface;
  • High safety level;
  • Multistep self fault protection;
  • Flexible auxiliary equipment integration.


    • Technical Specifications


    • Operating Conditions

      The cable test van is designed for an outdoors operation under the following conditions:

      Condition Value
      Air temperature, °С from -20 to +40
      Relative humidity, %, up to
      80 at +20° С
      Atmospheric pressure, kPa (mm hg) 
      84,0 – 106,7 (630 – 800)

      Operating ETL-8V in explosive environments is strictly prohibited!

    Parameter Value
    GENERAL parameter
    Input voltage, V 230 ± 23
    Frequency, Hz 50 ± 1
    Power consumption, kVA, max 1.5
    TEST MODE
    Output DC voltage range, kV 0 – 8
    Output DC current range, mA 0 – 10 
    BURN MODE
    Output DC voltage range, kV
    0 – 8
    Output DC current range, mA 0 – 100
    SURGE MODE
    DC voltage ranges, kV 2 / 4 / 8
    Output energy, J, max 1000
    Timer set (automatic surge mode), seconds 3 – 15
    Manual single surge  yes
    Flexible voltage change during automatic operation  yes
    Pinpointing with an acoustic receiver
     yes
    PRELOCATION MODE
    Methods TDR / Arc reflection / Impulse current / Voltage coupling
    Automatic distance measuring yes
    Saving cable parameters into Reflectometer non‑volatile memory yes
    Saving reflectograms either to Reflectometer non-volatile memory or USB flash drive yes
    CABLE TRACING MODE
    Cable tracing using 50W audio-frequency generator with frequencies 491/ 982/ 8440 Hz with a receiver yes

    Bình luận