Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Compliance 00-30AC-T-W HTT-1R Custom, Function Checker using custom test values

Mã sản phẩm:
Sử dụng cho Model:
Hãng SX: Compliance
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

The HTT-1R provides a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Continuity/Ground Bond Testers between calibration cycles, in accordance with requirements of TUV and other European agencies.  It uses actual loads to simulate barely passing and barely failing results to exercise the tester(s), and is designed to be used as a verification test fixture in compliance with the requirements for shift by shift verification stated in ECS CIG-023 Inspection Report, Section 4. See the Manuals Section below for an example of the CIG-023 Inspection Report.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Features


00-30AC-T-W HTT-1R Custom, Function Checker using custom test values
Ground Continuity Chassis to Ground (0.01Ω), and/or
High Leakage Line to Ground (120kΩ), and/or
Dielectric Withstand Failure (Arc View window displays an arc at 750Vac ± 400V).
The HTT-1 can also be set to simulate passing tests:
Ground Continuity Chassis to Ground (0.025Ω), and/or
Normal Leakage Line to Ground (220kΩ), and /or
Dielectric Withstand OK (up to 3000 volts)
Arc Testing is at 750 ± 400Vac. Results visible through Front Panel Window.
Works with any manufacturer's Dielectric Withstand or Ground Continuity Tester. The HTT-1 simulates the failures and your tester should return results consistent with the switch settings on the front panel of the HTT-1
The HTT-1 is a passive device. No batteries or power is required.
Verifies proper operation of your equipment in less than a minute.
Portable.
Light weight.
Simple to operate.
Saves time.
For testing of Ground Bond Testers up to 30A..


Specification:

Max Current capability of Ground Test circuit 30A
Setting of PASS for Leakage Current 220kΩ
Setting of FAIL for Leakage Current 120kΩ
Max Voltage capability of Hipot Test Circuit 3000Vac / 4200Vdc
Setting of PASS for Ground Circuit 0.025Ω
Setting of FAIL for Ground Circuit 0.1Ω
Setting of Arc Detection Circuit Arc-over at 750V +/- 400Vac / 1050V +/- 560Vdc
ENVIRONMENTAL
Operation Temp 15 - 40 C
Relative Humidity Range 0-90% non-condensing
GENERAL
Dimms 5.3"(W) x 6.8"(H) x 2.3"(D)


Bình luận