Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Compliance HTT-1R Custom Function Checker - Custom

Mã sản phẩm:
Sử dụng cho Model:
Hãng SX: Compliance
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

The HTT-1R provides a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Continuity/Ground Bond Testers between calibration cycles, in accordance with requirements of TUV and other European agencies.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Features


The HTT-1R Custom simulates the following failures:
Ground Continuity Chassis to Ground (0.01Ω), and/or
High Leakage Line to Ground (Custom Ω), and/or
Dielectric Withstand Failure (Arc View window displays an arc at 750Vac ± 400V).
The HTT-1R can also be set to simulate passing tests:
Ground Continuity Chassis to Ground (0.025Ω), and/or
Normal Leakage Line to Ground (Custom Ω), and /or
Dielectric Withstand OK (up to 3000 volts)
Arc Testing is at 750 ± 400Vac. Results visible through Front Panel Window.
Works with any manufacturer's Dielectric Withstand or Ground Continuity Tester. The HTT-1R simulates the failures and your tester should return results consistent with the switch settings on the front panel of the HTT-1R
The HTT-1R is a passive device. No batteries or power is required.
Verifies proper operation of your equipment in less than a minute.
Portable.
Light weight.
Simple to operate.
Saves time.
For testing of Ground Bond Testers up to 30A..
1 year warranty.


Specification:

Specifications
Max Current capability of Ground Test circuit 30A
Setting of PASS for Leakage Current Custom Ω
Setting of FAIL for Leakage Current Custom Ω
Max Voltage capability of Hipot Test Circuit 3000Vac / 4200Vdc
Setting of PASS for Ground Circuit 0.025Ω
Setting of FAIL for Ground Circuit 0.1Ω
Setting of Arc Detection Circuit Arc-over at 750V +/- 400Vac / 1050V +/- 560Vdc
ENVIRONMENTAL
Operation Temp 15 - 40 C
Relative Humidity Range 0-90% non-condensing
GENERAL
Dimms 5.3"(W) x 6.8"(H) x 2.3"(D)
Wt 2lbs


Bình luận