Features
Ideal for testing spot welds, bus bars, grounding straps, cables, chassis and other high current devices.
Logic Controlled, One-button testing. LED indicators. Buzzer upon failure, test terminates.
AC output. Constant current delivers 25 amps to any ground circuit with resistance of 0 to 0.1 .
Virtual voltage sense circuit.
NEMA 5-15 Receptacle
Calibration resistor mounted on rear panel.
Ideal for TUV, NEMKO and CE Safety Agency production line testing, including IEC601.
High efficiency design, low power consumption.
All test leads included.
Calibrated to NIST standards.
1 year warranty
Specification:
| Specifications |
| Voltage Test Type |
AC
|
| Voltage Range |
0-6 V |
| Current Set Point |
0-25 Ams ± 3% |
| Input Voltage Requirements |
117-127 V, 50 /60 Hz |
| Fuse Requirements |
120 V, 2 A Slow Blow |
| Pass/Fail Criterion |
0.1 Ω |
| Ramp Time |
10 mSec |
| Test Duration Timer |
0-25 Sec Approx. |
| Computer Control |
No |
| Operation Temperature |
15 - 35 °C |
| Relative Humidity Range |
0 - 90 % Non-condensing |
| Dimensions |
9-1/4" wide x 4-3/4" high x 10" deep |
| Weight |
11 Lbs |
| Calibration |
One year calibration Certificate |
|